user manual

3-80

Cisco 7600 Series Router MIB Specifications Guide

OL-4077-07

Chapter 3 Cisco 7600 MIB Specifications

CISCO-FTP-CLIENT-MIB

The CISCO-FTP-CLIENT-MIB contains objects to invoke File Transfer Protocol (FTP) operations for

network management. This MIB has no known constraints and all objects are implemented as defined in

the MIB.

CISCO-HSRP-EXT-MIB

The CISCO-HSRP-EXT-MIB provides an extension to the CISCO-HSRP-MIB which defines the Cisco

Hot Standby Router Protocol (HSRP), which is defined in RFC 2281. The extensions cover assigning of

secondary IP addresses and modifying an HSRP group’s priority.

CISCO-HSRP-MIB

The CISCO-HSRP-MIB contains objects to configure and manage the Cisco Hot Standby Router

Protocol (HSRP), which is defined in RFC 2281.

CISCO-IETF-ATM2-PVCTRAP-MIB-EXTN

The CISCO-IETF-ATM2-PVCTRAP-MIB-EXTN MIB supplements the

CISCO-IETF-ATM2-PVCTRAP-MIB.

CISCO-IETF-ATM2-PVCTRAP-MIB

The CISCO-IETF-ATM2-PVCTRAP-MIB supplements the ATM-MIB. It implements the virtual

channel link (VCL) section of the IETF document “draft-ietf-atommib-atm2-11.txt,” Section 9 ATM

Related Trap Support.

CISCO-IETF-DHCP-SERVER-EXT-MIB

The CISCO-IETF-DHCP-SERVER-EXT-MIB is an extension of the

CISCO-IETF-DHCP-SERVER-MIB.

CISCO-IETF-DHCP-SERVER-MIB

The CISCO-IETF-DHCP-SERVER-MIB contains objects for the entities implementing the server side

of the Bootstrap Protocol (BOOTP) and the Dynamic Host Configuration protocol (DHCP) for Internet

Protocol version 4(IPv4). This MIB does not include support for updating Dynamic DNS (DDNS) and

DHCP Failover Protocol.