user manual

3-81
Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07
Chapter 3 Cisco 7600 MIB Specifications
CISCO-IETF-FRR-MIB
CISCO-IETF-FRR-MIB
The CISCO-IETF-FRR-MIB contains managed object definitions for MPLS Fast Reroute (FRR).
CISCO-IETF-IP-MIB
The CISCO-IETF-IP-MIB contains objects to manage the Internet Protocol (IPv6), but not IP routes. The
MIB also contains objects to manage the Internet Control Message Protocol (ICMP). It is based on the
IETF document draft-ietf-ipngwg-rfc2011-update-00.txt and supports read-only.
Note This MIB only supports IPv6 interfaces.
Table 3-23 lists constraints that the Cisco 7600 Series router places on objects in the
CISCO-IETF-IP-MIB.
Table 3-23 CISCO-IETF-IP-MIB Constraints
MIB Object Notes
• cIpv6Forwarding Read-only.
• cIpv6DefaultHopLimit Read-only.
cIpv6InterfaceTable
•
cIpv6InterfaceIdentifier Read-only.
• cIpv6InterfaceIdentifierLength Read-only.
cIpAddressPfxTable
•
cIpAddressPfxOrigin Read-only.
Va l u es :
• other(1)
• manual(2)
cIpAddressTable
•
cIpAddressOrigin Read-only.
Va l u es :
• other(1)
• manual(2)
• wellknown(3)
• cIpAddressStatus Read-only. Value is depracated(2). No longer
supported
cInetNetToMediaTable
•
cInetNetToMediaPhysAddress Read-only.