user manual

3-82

Cisco 7600 Series Router MIB Specifications Guide

OL-4077-07

Chapter 3 Cisco 7600 MIB Specifications

CISCO-IETF-ISIS-MIB

The CISCO-IETF-ISIS-MIB contains objects to manage IS-IS Routing protocol described in ISO 10589.

IS-IS Routing protocol is used to construct routing tables for IP networks, as described in RFC 1195.

CISCO-IETF-IP-FORWARD-MIB

The CISCO-IETF-IP-FORWARD-MIB contains objects to manage multipath IP (IPv6) routes in a

classless interdomain routing (CIDR) environment. This MIB is based on the IETF document

draft-ietf-ipngwg-rfc2096-update-00.txt and supports read-only.

CISCO-IETF-PPVPN-MPLS-VPN-MIB

The CISCO-IETF-PPVPN-MPLS-VPN-MIB is an extension of the MPLS-VPN-MIB. It contains a new

notification, mplsNumVrfRouteMaxThreshCleared, which was added with

MPLS-VPN-MIB-DRAFT-05.

CISCO-IETF-PW-ATM-MIB

The CISCO-IETF-PW-ATM-MIB contains managed object definitions for Pseudo Wire emulation of

ATM over Packet Switched Networks(PSN).

CISCO-IETF-PW-ENET-MIB

The CISCO-IETF-PW-ENET-MIB describes a model for managing Ethernet point-to-point pseudo wire

services over a Packet Switched Network (PSN).

• cInetNetToMediaType Read-only.

Va l u es :

• other(1)

• dynamic(3)

• static(4)

• cInetNetToMediaState Read-only. Value is invalid(5). Not supported.

cInetIcmpTable

•

cInetIcmpOutErrors Not Implemented.

Table 3-23 CISCO-IETF-IP-MIB Constraints (continued)

MIB Object Notes