user manual

3-84
Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07
Chapter 3 Cisco 7600 MIB Specifications
CISCO-IMAGE-MIB
CISCO-IMAGE-MIB
The CISCO-IMAGE-MIB contains objects which identify the capabilities and characteristics of the
Cisco IOS image.
CISCO-IMAGE-TC-MIB
The CISCO-IMAGE-TC-MIB defines the textual conventions used in the enhanced image MIB.''
CISCO-IP-STAT-MIB
The CISCO-IP-STAT-MIB contains objects to manage the collection and display of IP statistics,
categorized by IP precedence and the Media Access Control (MAC) address associated with IP packets.
To use the MIB to access additional IP statistics, you can issue the ip accounting mac-address and
ip accounting precedence commands at the CLI.CISCO-IPMROUTE-MIB
The CISCO-IPMROUTE-MIB contains objects to manage IP multicast routing on the router.
CISCO-IPSEC-FLOW-MONITOR-MIB
The CISCO-IPSEC-FLOW-MONITOR-MIB allows monitoring of the structures in IPSec-based Virtual
Private Networks.
CISCO-IP-TAP-MIB
The CISCO-IP-TAP-MIB manages Cisco's intercept feature for IP. This MIB is used along with
CISCO-TAP2-MIB to intercept IP traffic.
CISCO-IP-URPF-MIB
The CISCO-IP-URPF-MIB contains objects to manage Unicast Reverse Path Forwarding (URPF).
URPF validates the source address of IP packets received on an interface to prevent Denial of Service
attacks based on IP address spoofing.
cieIfDot1qCustomerEtherTypeTable
Not implemented.
cieIfNameMappingTable
Not implemented.
1 Some objects defined in cieIfPacketStatsTable and cieIfInterfaceTable are applicable to physical interfaces
only. As a result, this table may be sparse for non-physical interfaces.
2 ATM interfaces do not support the cieIfKeepAliveEnabled object.
Table 3-24 CISCO-IF-EXTENSION-MIB Constraints (continued)
MIB Object Notes