user manual

3-94

Cisco 7600 Series Router MIB Specifications Guide

OL-4077-07

Chapter 3 Cisco 7600 MIB Specifications

CISCO-SONET-MIB

The CISCO-SONET-MIB contains objects to describe SONET/SDH interfaces on the router. This MIB

is an extension to the standard SONET-MIB (RFC 2558). The CISCO-SONET-MIB has objects that

provide additional SONET related information not found in the SONET-MIB. For detailed definitions

of MIB objects, see the MIB.

MIB Constraints

The following CISCO-SONET-MIB tables are not implemented in the Cisco 7600 platform:

• csConfigTable

• csVTConfigTable

• csAPSConfigTable

• cssTranceTable

• cspTranceTable

• csStatsTable

• cspConfigTable

Note Only the section, line, and path totals objects from the ciscoSonetStatsMIBGroup and the complete

ciscoSonetEnableGroup must be supported. All network elements containing one or more SONET

interfaces must implement this MIB.

CISCO-SRP-MIB

The CISCO-SRP-MIB contains objects that describe the spatial reuse protocol (SRP) interface layer.

CISCO-STACK-MIB

The CISCO-STACK-MIB provides configuration information and runtime status for router components.

On the Cisco 7600 Series router, the CISCO-STACK-MIB contains information about the chassis, ports,

and modules.

Note Before the ENTITY-MIB standardization, the OLD-CHASSIS-MIB and CISCO-STACK-MIB were

used to support physical entities. The CISCO-STACK-MIB is supported on the Cisco 7600 Series router

for LAN cards, OSM cards, and FlexWAN/SPAs. PAs, SIPs and SPAs and are not supported.

Table 3-29 lists the values that the Cisco 7600 Series router uses for module types.