Network Storage System Getting Started Guide

Setting up the Hardware
Connecting the Power
NSS3000 Series Network Storage System Getting Started Guide 8
2
Connecting the Chassis to an Uninterruptible Power Supply
To protect data against a sudden loss of power, follow these steps to connect the
chassis to an Uninterruptible Power Supply (UPS).
STEP 1 Connect one end of the supplied power cable to the Power port on the
NSS3000 chassis.
STEP 2 Connect the other end of the power cable to the UPS.
STEP 3 Use a USB signal cable to connect the UPS port on the chassis to the UPS.
Supported UPS Product Families
The NSS supports these UPS product families:
• APC Back-UPS Pro USB
• APC Back-UPS RS USB
• APC Back-UPS USB
• APC Back-UPS LS USB
• APC Back-UPS ES/CyberFort 350
• APC Smart-UPS USB
188914
to UPS
to UPS