Network Storage System Getting Started Guide

Setting up the Hardware
Using the NSS3000 LCD Panel
NSS3000 Series Network Storage System Getting Started Guide 11
2
- Short: If the pair has a short, the message appears as "pair a-b short@
Xm" (where "a" and "b" are the numbers of the pair, "X" is the location in
the cable where the short was found, and "m" stands for metres).
- Open: If the cable has an open, the message appears as "pair a-b open@
Xm (where "a" and "b" are the numbers of the pair, "X" is the location in the
cable where the open was found, and "m" stands for metres).
- Disconnected: If the cable shows an open at the minimum measurable
distance, it is assumed that the cable is not connected. The message
"Cable is not connected" appears.
The cable diagnostic test only runs the first time you display the Cable
Diagnostics screen. To rerun the test, scroll through the LCD screens until
you see the Cable Diagnostics screen appear again.
• Firmware Version/Update Date: Displays the version of the firmware and
the date that the last firmware upgrade was completed.
• Firmware Upgrade: Displays the progress of the firmware upgrade.
When you display this screen, a diagnostic test is automatically run (This
screen only appears when performing a firmware upgrade)
• System Time/Date: Displays the current time and date for the system. The
time appears using the 24-hour clock. The date appears as the day of the
week, the month as a three-character abbreviation, and the year.
For example, 21:45, Wed, Dec 12, 2008.
• Shutdown Screen: During the shutdown of the NSS, the LCD panel displays
the progress of the shutdown.
• Network Factory Defaults Restore: During the restoration of the default
network configuration the LCD panel displays that the network is being
restored and is changing the settings to the default settings.