Network Storage System Getting Started Guide

Configuring the NSS
Logging into the Configuration Interface
NSS3000 Series Network Storage System Getting Started Guide 15
3
STEP 1 Click Run Discovery Tool.
STEP 2 From the Cisco NSS Discovery Tool window, select the device from the list of
NSS devices, and then click Connect to GUI.
The NSS Login window appears.
STEP 3 Enter admin in the User Name and Password fields, then click OK. When you first
log into the configuration interface or if you reset the factory defaults, both the
username and password are set to "admin".
STEP 4 The setup configuration wizard starts.
STEP 5 Follow the onscreen instructions to complete the configuration.
STEP 6 After the configuration completes, change the administration password as
described in the
NSS3000 Series Network Storage System Administration Guide .