Installation Manual

CiscouBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and Configuration 15
Installing or Replacing a Wireless Modem Card
ALPHA DRAFT - CISCO CONFIDENTIAL
Figure11 Aligning the Wireless Modem Card Metal Carrier Between the Slot Guides
(CiscouBR7223 Shown)
Step4
With the metal carrier aligned in the slot guides, gently slide the modem card halfway into
the modem card slot.
CautionDo not slide the modem card all the way into the slot until you have connected all required
cables. Trying to do so will disrupt normal operation of the router.
Step5 With the modem card halfway in the slot, connect all required cables to the front of the
modem card. (See the section "Cabling a Wireless Modem Card" on Page3.)
Step6 After connecting all required cables, carefully slide the modem card all the way into the
slot until you feel the card’s connectors mate with the midplane.
Step7 Tighten the captive installation screws on the modem card. (See Figure9.)
NoteIf the modem card captive installation screws do not tighten all the way, the card
is not completely seated in the midplane. Carefully pull the modem card halfway out of
the slot, reinsert it, and tighten the captive installation screws.
This completes the procedure for installing a wireless modem card in the CiscouBR7200 series
router.