Installation Manual

CiscouBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and Configuration 17
Rack-Mounting a Power Feed Panel
ALPHA DRAFT - CISCO CONFIDENTIAL
To install a power feed panel with the rear panel facing forward, attach the brackets to both sides of
the unit as shown in Figure13.
Figure13 Bracket Installation - Rear Panel Forward
To install a power feed panel in a center-mount telco rack, attach the brackets to both sides of the
unit as shown in Figure14.
Figure14 Telco Bracket Installation - Rear Panel Forward
Installing the Power Feed Panel in the Rack
After the brackets are secured, attach the brackets on both sides of the power feed panel to the rack
as shown in Figure15.
Figure15 Attaching the Power Feed Panel to a Rack
Wall-Mounting the Power Feed Panel
To wall-mount the unit, use the same brackets as those used to install the power feed panel in an
equipment rack.
Use the following steps to wall-mount the power feed panel:
Step1 Attach the brackets to both sides of the power feed panel as shown in Figure16.