Installation Manual

18CiscouBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and Configuration
Installing a Power Feed Panel
ALPHA DRAFT - CISCO CONFIDENTIAL
Figure16 Attaching the Wall Mount Brackets
Step2
Attach the power feed panel to the wall as shown in Figure17, using (customer provided)
screws and anchors. To best support the power feed panel and cables, attach the brackets
so that the screws align with a vertical wall stud. (SeeFigure17.) This position will
prevent the unit from pulling away from the wall when the cables are attached.
Note
Figure17 Wall-Mounting the Power Feed Panel