Installation Manual

2 CiscouBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and Configuration
If You Need More Information
ALPHA DRAFT - CISCO CONFIDENTIAL
• Cisco Connection Online, page88
If You Need More Information
The Cisco IOS software running on your router contains extensive features and functionality. The
effective use of many of these features is easier if you have more information. For additional
information on configuring and maintaining the CiscouBR7200 series, the following
documentation resources are available:
• Cisco Documentation CD-ROM
Cisco documentation and additional literature are available in a CD-ROM package, which ships
with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is
updated monthly. Therefore, it might be more current than printed documentation. To order
additional copies of the Documentation CD-ROM, contact your local sales representative or call
customer service. The CD-ROM package is available as a single package or as an annual
subscription. You can also access Cisco documentation on the World Wide Web at
http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
If you are reading Cisco product documentation on the World Wide Web, you can submit
comments electronically. Click Feedback in the toolbar and select Documentation. After you
complete the form, click Submit to sent it to Cisco. we appreciate your comments.
• For Cisco IOS software configuration information, refer to the modular configuration and
modular command reference publications in the Cisco IOS software configuration
documentation set that corresponds to the software release installed on your Cisco hardware.
NoteYou can access CiscoIOS software configuration documentation on the World Wide Web
at http://www.cisco.com, http://www-china.cisco.com, http://www-europe.cisco.com.
• For hardware installation and maintenance information on the CiscouBR7200 series, refer to the
CiscouBR7200 Series Universal Broadband Router Installation and Configuration Guide that
shipped with your CiscouBR7246 or CiscouBR7223.
• For international agency compliance, safety, and statutory information for wide-area network
(WAN) interfaces for the CiscouBR7200 series, refer to the document Regulatory Compliance
and Safety Information for the CiscouBR7200 Series Universal Broadband Router.
• To obtain general information about documentation, refer to the "Cisco Connection Online"
section on page, or call customer service at 800553-6387 or 408526-7208. Customer service
hours are 5:00 a.m. to 6:00 p.m. Pacific time, Monday through Friday (excluding Cisco-observed
holidays). You can also send e-mail to [e-mail], or you can refer to the
CiscoInformation Packet that shipped with your router.
Wireless Modem Card and Subsystem Overview
The Cisco high-speed point-to-point fixed broadband wireless router system provides a fixed,
dedicated wireless link from one site to another. This link delivers 44 Mbps full-duplex data in a 12
MHz RF channel in the MDS band (2.500 to 2.690 GHz).
This broadband wireless router system consists of a CiscouBR7200 Series Universal Broadband
Router (CiscouBR7246, or CiscouBR7223) and one or more wireless modem cards (Figure1),
each with a power feed panel (Figure2), and outdoor unit (ODU) (Figure3). The diversity option
uses two outdoor units, one for each of two antennas.