Installation Manual

CiscouBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and Configuration 3
Wireless Modem Card and Subsystem Overview
ALPHA DRAFT - CISCO CONFIDENTIAL
The wireless modem cards are installed in a CiscouBR7200 series router. Each modem card is
cabled to a power feed panel installed either in the same equipment rack as the router or mounted on
the wall. Cables from the power feed panel are connected to the outdoor unit which is installed either
on the antenna pole or on a wall in close proximity to the antenna. The system is managed via a
command line interface (CLI) or CiscoWorks.
Figure1 Wireless Modem Card
Figure2 Power Feed Panel
Figure3 Outdoor Unit (ODU)