Installation Manual

62CiscouBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and Configuration
Configuring a Wireless Modem Card
ALPHA DRAFT - CISCO CONFIDENTIAL
When the threshold <inr> <lowThreshold> <2> is reached, the collection will stop and the results
will be printed out.
WMCS01(boot)(config-if)# radio timeline inr 640 dec 20 pre 2 tone average trigger inr
lowThreshold 2
show interfaces (tlspec)
Use this command to display the details of the timeline specifications currently configured. If none
of the optional parameters are specified then all the timeline specifications on the modem card are
displayed. If the <statParam><antenna_num> combination only is specified, then the configuration
setup on the default will be displayed. if the [dsp <dspId>] parameter is specified, then the
configurations on that DSP will be displayed.
Unless an error occurs, no notifications are displayed on the console.
show interfaces radio <slot/port> tlspec [<statParam> (antenna_num) [dsp <dspId>]]