User's Manual

39-29
Catalyst 3750 Switch Software Configuration Guide
OL-8550-09
Chapter 39 Configuring IPv6 Unicast Routing
Displaying IPv6
Table 39-4 shows the privileged EXEC commands for displaying information about IPv4 and IPv6
address types.
This is an example of the output from the show ipv6 interface privileged EXEC command:
Switch# show ipv6 interface
Vlan1 is up, line protocol is up
IPv6 is enabled, link-local address is FE80::20B:46FF:FE2F:D940
Global unicast address(es):
3FFE:C000:0:1:20B:46FF:FE2F:D940, subnet is 3FFE:C000:0:1::/64 [EUI]
Joined group address(es):
FF02::1
FF02::2
FF02::1:FF2F:D940
MTU is 1500 bytes
ICMP error messages limited to one every 100 milliseconds
ICMP redirects are enabled
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
ND advertised reachable time is 0 milliseconds
ND advertised retransmit interval is 0 milliseconds
ND router advertisements are sent every 200 seconds
ND router advertisements live for 1800 seconds
<output truncated>
This is an example of the output from the show ipv6 cef privileged EXEC command:
Switch# show ipv6 cef
::/0
nexthop 3FFE:C000:0:7::777 Vlan7
3FFE:C000:0:1::/64
attached to Vlan1
3FFE:C000:0:1:20B:46FF:FE2F:D940/128
receive
3FFE:C000:0:7::/64
attached to Vlan7
3FFE:C000:0:7::777/128
attached to Vlan7
3FFE:C000:0:7:20B:46FF:FE2F:D97F/128
receive
3FFE:C000:111:1::/64
attached to FastEthernet1/0/11
3FFE:C000:111:1:20B:46FF:FE2F:D945/128
receive
3FFE:C000:168:1::/64
attached to FastEthernet2/0/43
3FFE:C000:168:1:20B:46FF:FE2F:D94B/128
receive
Table 39-4 Commands for Displaying IPv4 and IPv6 Address Types
Command Purpose
show ip http server history Display the previous 20 connections to the HTTP server, including the IP
address accessed and the time when the connection was closed.
show ip http server connection Display the current connections to the HTTP server, including the local and
remote IP addresses being accessed.
show ip http client connection Display the configuration values for HTTP client connections to HTTP
servers.
show ip http client history Display a list of the last 20 requests made by the HTTP client to the server.