User's Manual

8-7
Catalyst 3750 Switch Software Configuration Guide
OL-8550-09
Chapter 8 Configuring SDM Templates
Configuring the Switch SDM Template
number of unicast mac addresses: 3K
number of igmp groups + multicast routes: 1K
number of unicast routes: 11K
number of directly connected hosts: 3K
number of indirect routes: 8K
number of qos aces: 512
number of security aces: 1K
On next reload, template will be "aggregate routing" template.
To return to the default template, use the no sdm prefer global configuration command.
This example shows how to configure a switch with the routing template (the desktop routing template
for a desktop switch or the aggregator routing template for a Catalyst 3750-12S).
Switch(config)# sdm prefer routing
Switch(config)# end
Switch# reload
Proceed with reload? [confirm]
This example shows how to configure the desktop routing template on a Catalyst 3750-12S switch:
Switch(config)# sdm prefer routing desktop
Switch(config)# end
Switch# reload
Proceed with reload? [confirm]
This example shows how to configure the IPv4-and-IPv6 default template on a desktop switch:
Switch(config)# sdm prefer dual-ipv4-and-ipv6 default
Switch(config)# exit
Switch# reload
Proceed with reload? [confirm]