Switch User Manual

22-22
Cisco ONS 15454 Procedure Guide, R7.0
November 2007
Chapter 22 DLPs A500 to A599
DLP- A526 Change Line and Threshold Settings for the DS3i-N-12 Cards
Step 8 Right-click anywhere in the downloaded profile column to view the profile editing shortcut menu.
Step 9 Click Store.
Step 10 In the Store Profile(s) dialog box, click To N ode(s).
a. Choose the nodes where you want to save the profile:
– If you want to save the profile to only one node, click the node in the Node Names list.
– If you want to save the profile to all nodes, click Select All.
– If you do not want to save the profile to any nodes, click Select None.
– If you want to update alarm profile information, click (Synchronize).
b. Click OK.
Step 11 Return to your originating procedure (NTP).
DLP-A526 Change Line and Threshold Settings for the DS3i-N-12 Cards
Note For the default values and domains of user-provisionable card settings, refer to the “Network Element
Defaults” appendix in the Cisco ONS 15454 Reference Manual.
Step 1 In node view, double-click the DS3i-N-12 card where you want to change the line or threshold settings.
Step 2 Click the Provisioning tab.
Step 3 Depending on the setting you need to modify, click the Line, Line Thresholds, Elect Path Thresholds,
or SONET Thresholds subtab.
Note See Chapter 8, “Manage Alarms” for information about the Alarm Profiles tab.
Note If you want to modify a threshold setting, it might be necessary to click on the available
directional, type, and interval (15 Min, 1 Day) radio buttons and then click Refresh. This will
display the desired threshold setting.
Step 4 Modify the settings found under these subtabs by clicking in the field you want to modify. In some fields
you can choose an option from a drop-down list; in others you can type a value.
Step 5 Click Apply.
Step 6 Repeat Steps 3 through 5 for each subtab that has parameters you want to provision.
Purpose This task changes the line and threshold settings for the DS3i-N-12 cards.
Tools/Equipment None
Prerequisite Procedures DLP-A60 Log into CTC, page 17-69
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher