User's Manual

Top Panel

Wi-Fi Protected If you have a client device, such as a wireless adapter, that supports

Setup Wi-Fi Protected Setup, then you can use Wi-Fi Protected Setup to

automatically configure wireless security for your wireless network(s).

Note: Wi-Fi Protected Setup can only be used for the default wireless

network. (The Router supports up to four wireless networks. The other

three can be configured using the Router’s web-based utility.)

Follow the appropriate instructions:

Method #1

Use this method if your client device has a Wi-Fi Protected Setup button.

1. Click or press the Wi-Fi Protected Setup button on the client device. (If Wi-Fi Protected

Setup is an on-screen option, then select it.)

2. Click the Wi-Fi Protected Setup button on the top panel of the Router.

3. After the client device has been configured, refer back to your client device or its

documentation for further instructions.

Method #2

Use this method if your client device has a Wi-Fi Protected Setup PIN number.

1. Access the Router’s web-based utility.

2. Click the Wireless tab.

3. Click the Wi-Fi Protected Setup tab

4. Enter the client PIN number in the PIN field on this screen (the Router’s Wi-Fi Protected

Setup screen).

5. Click Register.

Method #3

Use this method if your client device asks for the Router’s PIN number.

1. Enter the PIN number listed on the label on the bottom of the Router.

2. After the client device has been configured, refer back to your client device or its

documentation for further instructions.

Note: Wi-Fi Protected Setup configures one client device at a time. Repeat the instructions

for each client device that supports Wi-Fi Protected Setup.

FPO

DRAFT - 6/25/201