User's Manual

10
Setup > Internet
WAN Connection Settings
Network Type: Choose your network type. Connection Type
Auto Detection Settings
Auto Detect Connection: Allows you to enable or disable internet connection type auto
detection.
Protocol Detection: Select this checkbox if you want the router to detect the internet connection
continuously, as defined by the Auto Detection Interval.
Auto Detection Interval: Specify how often the router should detect the internet connection (if
you chose Protocol Detection).
Ethernet WAN Setup
Connection Type: Choose whether your WAN uses IPoE (including DHCP and static IP) or
PPPoE.
IPoE Settings
IPoE Connection: Need text.
Gateway Probing: Choose whether you want to probe the gateway if the gateway is alive. Select
ARP to resolve MAC address by default.
Probing Using Unicast: Choose whether you want to ping the gateway with an ICMP request.
Probing Only on Idle: Choose whether you want to restrict probing if traffic is going through
router.
Probing Interval: Specify your probing interval, in seconds.
Probing Reset Trigger: Specify how long the probe should run before resetting the connection
Setup > Internet
DRAFT - 6/25/201
0