User's Manual

WPA2 Enterprise

This option features WPA2 used in coordination with a RADIUS server. (It should only be used

when a RADIUS server is connected to the Router.)

Mixed Mode Select Enabled to support both WPA and WPA2 clients. Otherwise, keep the

default, Disabled.

Encryption Select the appropriate method, AES or TKIP or AES.

RADIUS Server Enter the IP address of the RADIUS server.

RADIUS Port Enter the port number of the RADIUS server. The default value is 1812.

Shared Key Enter the key shared between the Router and the server.

Key Renewal Enter a Key Renewal period, which instructs the Router how often it should change

the encryption keys. The default is 3600 seconds.

Click Save Settings to apply your changes, or click Cancel Changes to cancel your

changes.

Wireless > MAC Filter

Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting

within your network’s radius.

Wireless MAC Filter

Select Wireless Network (SSID) Select the wireless network you want to configure.

Enabled/Disabled To use the wireless MAC filter, select Enabled. Otherwise, keep the default,

Disabled.

MAC Address Filter

Filter As White List/Filter As Black List

To allow access by network devices with the MAC

addresses on this list, select Filter As White List. To block access by network devices with the MAC

addresses on this list, keep the default, Filter As Black List

MAC 01-20 Enter the MAC addresses of the devices whose wireless access you want to block

or allow.

For each wireless device, its MAC address and connection status are listed. To copy a

MAC address to one of the MAC 01-20 fields, click Copy.

Click Save Settings to apply your changes, or click Cancel Changes to cancel your

changes.

Wireless > Wi-Fi Protected Setup

There are two ways to configure the Router’s wireless settings, manual and Wi-Fi Protected

Setup. For manual configuration, click the Basic Settings tab (refer to the “Wireless > Basic

Settings” section for more information).

Wi-Fi Protected Setup is a feature that makes it easy to set up your wireless network. If you

have devices that support Wi-Fi Protected Setup, then use the following instructions.

Note: Wi-Fi Protected Setup can only be used for the default wireless network. (The

Router supports up to four wireless networks. The other three can be configured using

the Wireless > Basic Settings screen of the Router’s web-based utility.)

Wireless > MAC Filter

Wireless > Wi-Fi Protected Setup

Security Mode > WPA2 Enterprise

DRAFT - 6/25/201