User's Manual

Factory Defaults

Restore Factory Defaults To reset settings to the default values, click this button and follow

the on-screen instructions. Any custom Router settings you have saved (except for the voice

settings) will be lost when the default settings are restored.

Administration > Upgrade

The Upgrade screen allows you to upgrade the Router’s firmware. Do not upgrade the

firmware unless you are experiencing problems with the Router or the new firmware has a

feature you want to use.

Note: The Router may lose the settings you have customized. Before you upgrade its

firmware, write down all of your custom settings. After you upgrade its firmware, you will

have to re-enter all of your configuration settings.

Firmware Upgrade

Before upgrading the firmware, download the Router’s firmware upgrade file from the

Cisco website, www.linksysbycisco.com/international. Then extract the file.

Please Select a File to Upgrade Click Browse and select the extracted firmware upgrade

file.

Start to Upgrade After you have selected the appropriate file, click this button, and follow the

on-screen instructions.

Note: In rare cases (such as a power failure), the firmware upgrade may fail. If that

happens, the Router will enter recovery mode and automatically download firmware from

your service provider’s provisioning server.

Administration > Reboot

The Reboot screen allows you to restart the Router through the web-based utility.

Reboot

Click Reboot Box to restart the Router. The restart will terminate the Internet connection.