User's Manual

36
Administration > IGMP
IGMP Access Policy Control
IGMP Access Policy Table:
Needs text.
IGMP Access Policy Rule
IGMP Access control: Choose whether to allow multicast traffic of a specific multicast
group.
Group Address: Type the IP address of multicast traffic which is affected the rule.
Address Mask: Type the network mask of the IP address specified in the Group Address.
Allow Traffic: Choose whether to allow multicast traffic. This rule defines how the router
will respond to a multicast route from outside.
IGMP Hosts
IGMP Host Table
Needs text.
Status > Internet
The Internet screen displays information about the Router and its current settings.
Router Information
Manufacturer OUI The manufacturer ID number is displayed.
Serial Number The serial number of the Router is displayed.
Hardware Version The version number of the Router’s hardware is displayed.
Software Version The version number of the Router’s software is displayed.
System Uptime The length of time the Router has been active is displayed.
Local Time The date and time of the Router are displayed.
Internet Connection
This section shows the current information for enabled connections. The table lists the
following information about each connection: Interface, MAC/IP/Subnet, Router, DNS, and
Status.
For DHCP connections, you can manually renew or release them. For PPP-type connections,
you can manually connect or disconnect them.
Click Refresh to update the on-screen information.
Status > Internet
Administration > IGMP
DRAFT - 6/25/201
0