User's Manual

User Options
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 7.1(3) (SIP) 103
EFT DRAFT - CISCO CONFIDENTIAL
3. Select a phone from the Name drop-down menu.
4. Select Line Settings.
5. If you have more than one directory number (line) assigned to your phone, select a line from the
Line drop-down menu.
6. In the Line Text Label area, enter a text label.
Your phone uses the ASCII Label field if the phone does not support double-byte character sets.
7. Select Save.
Customize Do Not Disturb Options
1. Sign in to your User Options web pages. Your system administrator sets up the Do Not Disturb
(DND) feature for your phone.
2. From the drop-down menu, select User Options > Device.
3. Set the following options:
– Do Not Disturb—Check the check box to enable or disable DND.
– DND Option—Select either None or Ringer Off (to turn off only the ringer).
– DND Incoming Call Alert (applies to either DND option set)—Set the alert to Beep Only,
Flash Only, Disable, or select “None” (to use the “Alert” setting set up by your system
administrator).
Related Topics
Do Not Disturb, page 83
Speed Dial on the Web
Depending on how your phone has been set up, you can use speed-dial line buttons and speed-dial
codes, which you can set up on your User Options Web pages.
Set Up Speed-Dial Buttons
1. Sign in to your User Options Web pages.
2. Select User Options > Device.
3. Select a phone from the Name drop-down menu.
4. Select Speed Dials.
5. In the Speed Dial Settings area, enter a number and label for a speed-dial button on your phone.
6. Select Save.