User manual

3-6 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C
Remote Control Functions
The remote control is provided as a standard feature with the D9865 Satellite
Receiver. After unpacking your satellite receiver, check that you have the following
accessories (if ordered):
• One IR (Infra-Red) Remote Control transmitter (RCU)
• Two AAA size batteries for Remote control (not included for Argentina)
The Remote Control is used to control receiver functions. You can switch the video/
audio outputs on and off plus activate and navigate the on-screen menus. Some
remote control functions are duplicated on the front panel (see Front Panel LEDs,
on page 3-3).
Remote Control Button Function
DISPLAY • Enables the video/audio outputs.
0 to 9 • Enters channel numbers or information on
on-screen menus.
• Alphanumeric character entry for “Name”
field on the on-screen menus (similar to keys
on telephone keypad). If an entered value is
out of range or conflicts with another setting,
a pop-up message displays information
about the error.
00 (pressing 0 twice) – deletes a character at
the cursor location.
11 (pressing 1 twice) – adds a space at the
cursor location.
FAV • Displays Favorite screen where you can
view and set favorite channels.
LAST • Displays last channel.
MENU • Displays Main Menu.
• Exits edit mode in menus.
• Returns to video in video mode.
• Returns to previous menu.