User's Manual
Table Of Contents
- 78-20139-01.JAB.cn
- Before You Begin
- Product Features
- Connecting the Equipment
- Configuration and Management of the ATA
- Registering a Cisco SPA302D Handset
- Additional Information
- Where to Go From Here
- Avant de commencer
- Fonctions du produit
- Connexion de l'équipement
- Configuration et gestion de l'adaptateur de terminal analogique
- Enregistrement d'un combiné Cisco SPA302D
- Informations supplémentaires
- Problèmes et solutions
12 Cisco SPA232D Quick Start Guide
Mounting the ATA
You can place the ATA on a desktop or mount it on a wall.
CAUTION To prevent the ATA from overheating, do not operate it in an
area that exceeds an ambient temperature of 104°F (40°C).
Desktop Placement
Place the ATA on a flat surface near an electrical outlet.
WARNING Do not place anything on top of the ATA; excessive weight
could damage it.
Wall Mounting
The ATA has two wall-mount slots on the bottom panel. To mount the ATA
on a wall, you need mounting hardware (not included). Suggested
hardware is illustrated (not true to scale).
Recommended hardware (not included): Two number-six pan-head
tapping screws, 5/8-in. length, with anchors for sheet rock installation.
WARNING Insecure mounting might damage the ATA or cause injury. Cisco
is not responsible for damages incurred by insecure wall-
mounting.
15,8 mm