User's Manual
Table Of Contents
- 78-20139-01.JAB.cn
- Before You Begin
- Product Features
- Connecting the Equipment
- Configuration and Management of the ATA
- Registering a Cisco SPA302D Handset
- Additional Information
- Where to Go From Here
- Avant de commencer
- Fonctions du produit
- Connexion de l'équipement
- Configuration et gestion de l'adaptateur de terminal analogique
- Enregistrement d'un combiné Cisco SPA302D
- Informations supplémentaires
- Problèmes et solutions
4 Cisco SPA232D Quick Start Guide
Default Settings
PHONE (Gray) Connects to an analog phone, using an RJ-11 phone
cable.
ETHERNET
(Yellow)
Connects to a device on your local area network (LAN),
such as a computer by using an Ethernet cable.
INTERNET (Blue) Connects to a broadband network device (DSL or
cable modem) or a network router by using an Ethernet
cable.
POWER Connects to a power by using the provided adapter.
Parameter Default Value
Administrator Username admin
Administrator Password admin
User Username cisco
User Password cisco
Internet Connection Type Automatic Configuration - DHCP
LAN IP Address
(Also the address for the web-
based configuration utility.)
192.168.15.1
DHCP Range
(DHCP server enabled by default.)
192.168.15.100-149
Netmask 255.255.255.0
PIN for handset registration, IP
settings, and SIP settings
Blank
Feature Description