User's Manual
Table Of Contents
- 78-20139-01.JAB.cn
- Before You Begin
- Product Features
- Connecting the Equipment
- Configuration and Management of the ATA
- Registering a Cisco SPA302D Handset
- Additional Information
- Where to Go From Here
- Avant de commencer
- Fonctions du produit
- Connexion de l'équipement
- Configuration et gestion de l'adaptateur de terminal analogique
- Enregistrement d'un combiné Cisco SPA302D
- Informations supplémentaires
- Problèmes et solutions
Cisco SPA232D Quick Start Guide 5
Connecting the Equipment
NOTE For wall-mounting instructions, see Additional Information, page 8.
STEP 1 Connect the provided Ethernet cable to the INTERNET (Blue) port.
Connect the other end of the cable directly to your broadband
network device.
STEP 2 Connect the provided phone cable to the PHONE 1 (Gray) port.
Connect the other end of the cable to your analog phone or fax
machine.
STEP 3 Optionally, connect an Ethernet network cable to the ETHERNET
(Yellow) port of the ATA. Connect the other end of the cable to a
device on your network, such as a computer.
STEP 4 Connect an analog phone line to the LINE (Green) port to connect
the ATA to your local telephone system.
STEP 5 Connect the provided power adapter to the POWER port. The unit
powers on.
3
239756
WAN