USER GUIDE Cisco Small Business SPA525G and SPA525G2 SPCP IP Phones
Contents Chapter 1: Getting Started 4 Overview 4 Caring for Your Phone Understanding Your Phone Lines and Buttons 6 7 Phone Components 7 Softkey Buttons 9 Using the Keypad and Buttons with Menus 13 Using Keypad Shortcuts 13 Using the Navigation Button 13 Entering Numbers and Text in Fields 14 Using Phone Hardware and Accessories 15 Using the Speakerphone 15 Using Wired and Wireless Headsets 15 Switching Between the Handset, Headset, and Speakerphone 19 Using the Cisco Attendant
Contents Chapter 3: Using Basic Phone Functions 35 Placing or Answering a Call 36 Adjusting Call Volume and Muting 36 Using Mute 37 Putting a Call on Hold 37 Resuming a Call 37 Ending a Call 37 Transferring Calls 38 Managing Call Waiting 38 Recording a Live Call 39 Viewing and Returning Calls 39 Forwarding Calls 40 Setting Do Not Disturb 40 Configuring Call Waiting 41 Picking Up a Call 42 Placing a Three-Way Conference Call 42 Using the Phone Directories 43 Using Your Pers
Contents Pairing Your Cisco SPA525G2 with a Bluetooth-Enabled Mobile Phone 49 Verifying that the Cisco SPA525G2 is Paired 51 Importing Your Mobile Phone Address Book into the Cisco SPA525G2 52 Making a Mobile Phone Call through the Cisco SPA525G2 53 Receiving Mobile Phone Calls by using the Cisco SPA525G2 54 Switching Audio from Your Cisco SPA525G2 to Your Mobile Phone 54 Viewing Mobile Phone Battery and Signal Information on Your Cisco SPA525G2 54 Charging Your Mobile Phone Using Your Cisco
1 Getting Started This chapter provides an overview of your Cisco Attendant Console IP phone.
1 Getting Started Overview Setup of the phone network is typically performed by using Cisco Configuration Assistant (CCA) software. This software is available on Cisco.com. The phone can be powered by connecting your phone to an Ethernet switch that provides Power over Ethernet (PoE) or you can use an optional Cisco PA100 power adapter. A phone is connected to the network through an Ethernet connection or the built-in Wireless-G radio.
1 Getting Started Overview • Wireless-G client support • Kensington security slot The functionality of the phones can be modified by your phone system administrator. Not all of the functional features described in this document are available or they might function slightly differently on your phone. This document describes the features as they function in factory default mode.
1 Getting Started Understanding Your Phone Lines and Buttons Understanding Your Phone Lines and Buttons Figure 1 identifies the parts of your phone. Phone Components Figure 1 Cisco SPA525G and Cisco SPA525G2 Phone Components Table 1 IP Phone Components # Phone Feature Description 1 Handset Pick up to answer or place calls. 2 Speaker Speaker for phone. 3 Message Waiting Indicator When lit: • Red—You have a new voice mail message. • Flashing Red—You have an incoming call.
1 Getting Started Understanding Your Phone Lines and Buttons Table 1 IP Phone Components # Phone Feature Description 4 IP phone screen Your phone might vary, but typically it displays: 5 Line keys • Date and time • Phone station name • Line extensions • Softkey options • Startup logo, screen saver, background photo, and photo album Phone line status: • Green (steady): Line is in use. • Green (blinking): There is an incoming call. • Red (blinking): Line is on hold.
1 Getting Started Understanding Your Phone Lines and Buttons Table 1 IP Phone Components # Phone Feature Description 11 Setup button Press to access a menu to configure features and preferences (such as your directory, status, and speed dials), access your call history, set up functions (such as call forwarding), and provide phone status information. 12 Mute button Press to mute or unmute the phone. When the phone is muted, the button glows red.
1 Getting Started Understanding Your Phone Lines and Buttons Table 2 Softkey Buttons Button Function Call Rtn Returns the last missed call by dialing the number that called you. See “Viewing and Returning Missed Calls,” on page 41. Callback Plays an audio and visual notification on your phone when a busy or unavailable party becomes available. cbarge Allows callers to join a shared-line call. CFwdAll Forwards all calls to a specified number.
1 Getting Started Understanding Your Phone Lines and Buttons Table 2 Softkey Buttons Button Function Flash Provides hookflash functionality for three-way calling and call waiting services provided by the PSTN or Centrex service. Forward Forwards calls coming to your phone. See “Forwarding Calls,” on page 42. GPickup Allows you to pick up (answer) a call at that is ringing at another extension in your group. See “Picking Up a Call,” on page 44.
1 Getting Started Understanding Your Phone Lines and Buttons Table 2 Softkey Buttons Button Function Refresh Refreshes the screen. Useful after changing a configuration or when you want to update information. Remove Removes conference participant. RmLstC Removes Last Participant from the Conference Call Resume Resumes a call that is on hold. Save Saves your changes. Scan Scans for wireless networks or Bluetooth devices. Select Selects the highlighted item on the IP phone screen.
Getting Started Using the Keypad and Buttons with Menus 1 Using the Keypad and Buttons with Menus Press a softkey and keypad buttons to navigate menus and enter parameters on the IP phone screen. Using Keypad Shortcuts Use the keypad to enter the number of the menu or sub-menu item. For example, to open a menu that is labeled with number 2, press 2. NOTE Menus and options can change depending on the software release and what is allowed by your phone system administrator.
1 Getting Started Entering Numbers and Text in Fields Entering Numbers and Text in Fields Some fields on the IP phones require you to enter numbers and text by using the keypad or softkey buttons. In general, the following guidelines apply: • Use the keypad to enter numbers and characters, pressing the key multiple times to select the correct number or letter. • Press the number key multiple times to move to a different letter under that number.
Getting Started Using Phone Hardware and Accessories 1 Using Phone Hardware and Accessories Using the Speakerphone The IP phones provide a speakerphone. To use the speakerphone, press Speaker (the handset can be either on or off hook). Using Wired and Wireless Headsets The SPA IP phones support headsets from different manufacturers. For the latest supported models, contact your reseller. Additional information can be found at the manufacturer websites.
Getting Started Using Phone Hardware and Accessories 1 Connecting Bluetooth Headsets Your phone is Bluetooth compatible and works with Bluetooth devices such as headsets. To configure the phone to work with your headset, enable Bluetooth: STEP 1 Press Setup. STEP 2 Select User Preferences > Bluetooth Configuration.
Getting Started Using Phone Hardware and Accessories 1 STEP 3 With Bluetooth highlighted, press the Arrow keys to toggle Bluetooth on or off. STEP 4 Press Set. STEP 5 Create a profile for your headset. In the Bluetooth Configuration screen, scroll to Bluetooth Profiles. Press the Right Arrow key to enter the profile screen. You are not allowed to navigate to the Bluetooth profiles screen, unless Bluetooth is enabled and set. STEP 6 Press Scan to scan for your headset.
Getting Started Using Phone Hardware and Accessories 1 STEP 3 Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the following: • Phone—Your IP phone pairs with a Bluetooth headset. Choose this option if you will not use the Cisco IP phone with a Bluetooth-enabled mobile phone. • Handsfree—Your IP phone will operate as a handsfree device with a Bluetooth-enabled mobile phone. • Both—Your Cisco IP phone uses a Bluetooth headset or operates with a Bluetooth-enabled mobile phone.
1 Getting Started Using the Cisco Attendant Console • To use a Bluetooth headset, make sure your headset is powered on. Press Headset on your phone (or, if supported, press Answer on your Bluetooth headset twice) and dial the number to place a call. Press Answer on your Bluetooth headset to answer a ringing call. See the user documentation for your Bluetooth headset for more information. Switching Between the Handset, Headset, and Speakerphone Any of these audio devices can be used during a call.
1 Getting Started Using the Cisco Attendant Console Configuration of the Cisco Attendant Console and assignment of the line buttons is typically performed by the phone system administrator and is not described in this document. The Cisco Attendant Console can be configured by using the same phone web user interface for the IP phone to which the Cisco Attendant Console is attached. See the Cisco SPA300 Series, SPA500 Series, and WIP310 Administration Guide on Cisco.com for more information.
2 Installing Your Phone This chapter describes how to install and connect your IP phone.
2 Installing Your Phone Connecting the Handset Connecting the Handset STEP 1 Find the longer end of the coiled phone cord. Insert it into the back of the phone base in the slot marked with a phone symbol. This port is labeled #5 on Figure 2. STEP 2 Insert the short end of the handset cord into the jack at the bottom of the handset (not shown).
2 Installing Your Phone Connecting the Handset Number Component 1 Auxiliary port. Only for use with the Cisco Attendant Console. 2 Power port. Insert the power adapter plug into this port. (Use only with a Cisco PA100 power adapter.) 3 Additional Ethernet port. Connect an Ethernet cable to this port to provide network connectivity to a PC. (This port cannot be used when the phone is connected to the network by using the built-in Wireless-G client.) 4 Ethernet port.
2 Installing Your Phone (Optional) Attaching the Desk Stand (Optional) Attaching the Desk Stand Do not attach the desk stand if you want to mount the phone to the wall. If you are attaching a Cisco Attendant Console attach the console before attaching the desk stand. STEP 1 Line up the tabs on the desk stand with the slots on the back of the phone. STEP 2 Slide the bottom tabs into the slots. STEP 3 Lightly press down on the top of the desk stand. It should easily slide into the top slots.
Installing Your Phone Connecting Your Phone Power 2 Connecting Your Phone Power The Cisco SPA525G and Cisco SPA525G2 do not ship with power supplies. If you are not using Power over Ethernet (PoE), you must order a Cisco PA100 power adapter for each phone. If you are using Power over Ethernet (PoE) to power the phone, the phone receives power when you connect an Ethernet cable from the phone SW port to a switch that provides PoE. See the “Connecting Your Phone to the Wired Network” section on page 25.
Installing Your Phone Connecting Your Phone to the Network 2 Connecting Your Phone to the Wireless Network The Cisco SPA525G and Cisco SPA525G2 phone supports connections to a wireless network. Before setting up the wireless network, you must know the wireless security type for your router.
Installing Your Phone Connecting Your Phone to the Network 2 The following example shows WEP information for a Linksys WRV200 router: If your router is using WPA, note the WPA shared key, or passphrase that you shall enter when configuring the phone.
Installing Your Phone Connecting Your Phone to the Network 2 Setting the Phone Wireless Connection To set up the Cisco SPA525G and Cisco SPA525G2 wireless connection: STEP 1 If you have plugged in an Ethernet cable to connect the phone to the wired network, remove it and reboot the phone. When the phone is connected by using wired Ethernet, the phone Wi-Fi connection is disabled. STEP 2 Press Setup. STEP 3 Scroll to Network Configuration and press Select.
Installing Your Phone Connecting Your Phone to the Network 2 STEP 7 Choose one of the following options: • Wireless Profile—Use this option to add a new wireless profile (either manually or by scanning for available networks), editing an existing wireless profile, or connecting to a previously configured network. See Manually Adding a Wireless Profile, page 30. • Wi-Fi Protected Setup—If your wireless router supports Wi-Fi Protected Setup, use this method to set up your wireless connection.
Installing Your Phone Connecting Your Phone to the Network f. 2 Save your changes. g. On the Cisco SPA525G and Cisco SPA525G2, with PIN Configuration highlighted, press Select. To add the connection as a profile, press OK. Your phone might reboot before the Wi-Fi connection is established. Manually Adding a Wireless Profile To add a new wireless network profile: STEP 1 In the Network Configuration screen, ensure Wi-Fi is enabled.
2 Installing Your Phone Connecting Your Phone to the Network • WPA/WPA2 Enterprise: This type of authentication requires some advanced expertise because it involves setting up a radius server for authentication and, in some cases, creation of certificates for both the radius server and the phone.
2 Installing Your Phone Connecting Your Phone to the Network - TLS: Enter the User ID, choose whether the phone should check for the server certificate, enter the User ID, and configure the Root certificate and User certificate (see the “Uploading Security Certificates to the Phone” section on page 32). STEP 3 To save as a wireless profile, press Save.
2 Installing Your Phone Verifying Phone Startup Verifying Phone Startup After receiving power and network connectivity, the phone executes a boot-up sequence. During this sequence, the display shows the Cisco logo. All of the lights on the phone will flash. After this sequence (about five seconds) the phone displays the standard menu. The date, name and number of the phone appear on the top line of the IP phone screen. At the bottom of the IP phone screen, softkeys appear over their associated buttons.
Installing Your Phone Updating Your Phone Firmware 2 STEP 4 Locate the phone firmware file that you downloaded from Cisco.com (for example: spa525g2-7-4-4.bin). STEP 5 In the Topology View, use the mouse to drag the phone load file from the folder on your PC to the UC 500 icon. If CCA recognizes the file as a valid phone load, a popup dialog displays and you are prompted to upload the file. STEP 6 Select the file and click Upload. The dialog displays the upload and updated progress.
3 Using Basic Phone Functions This chapter describes how to use the basic functions of your Cisco SPA525G and SPA525G2 IP phone.
3 Using Basic Phone Functions Placing or Answering a Call Placing or Answering a Call You might have to dial a number or numbers to reach an outside line. Ask your system administrator. Depending on the phone system setup, you might be able to place or answer calls by using various methods. To place or answer a call: • Pick up the handset. • Press the Speaker button. • Press the Headset button. • Press a line button to place a call or a blinking line button to answer a call.
Using Basic Phone Functions Putting a Call on Hold 3 Using Mute To mute the phone microphone, speaker, or headset microphone, press Mute. The button lights red. Press Mute again to unmute. Putting a Call on Hold To put an active call on hold, press Hold. A series of beeps (default) or (optional) music-on-hold plays for the caller to indicate that the call is on hold. Resuming a Call To resume the call, press the (optionally configured) flashing–red line button for the call.
3 Using Basic Phone Functions Transferring Calls Transferring Calls You can transfer a call to another extension. STEP 1 During an active call, or with a call on hold, press Trnsfer. STEP 2 Do one of the following: • Enter the number to where you want to transfer the call; or • Use the directory to choose a number from the personal directory. STEP 3 Press Dial or wait a few seconds. The call is placed on hold and a new line is opened to dial the number.
3 Using Basic Phone Functions Recording a Live Call To return to the original call, use the following method: STEP 1 Use the navigation button to select the call. STEP 2 Press Resume to reconnect to the call. Recording a Live Call If this feature is available on your phone, you can record a call. STEP 1 Press LiveRcd. This puts the other party on hold and initiates a call to the configured live record number. STEP 2 Press LiveRcd again to stop the recording.
3 Using Basic Phone Functions Forwarding Calls • Press Option to modify the list and choose: - Delete Entry to remove the entry from the list. - Delete List to delete all entries from the list. - Add to Address Book to add the entry to your personal address book. Forwarding Calls When you will be away from your phone, you can press a button to forward all calls to a specified number.
Using Basic Phone Functions Configuring Call Waiting 3 STEP 1 Choose Call Preferences. STEP 2 Scroll to Do Not Disturb. STEP 3 Press the Right Arrow key to turn Do Not Disturb on. STEP 4 Press Save. STEP 5 To turn off Do Not Disturb, press DnD. Press Setup and select User Preferences. Then: STEP 1 Choose Call Preferences. STEP 2 Scroll to Do Not Disturb. STEP 3 Press the Right Arrow key to turn Do Not Disturb off. STEP 4 Press Save.
Using Basic Phone Functions Picking Up a Call 3 Picking Up a Call Depending on the way your phone network is configured, you can pick up a call ringing at another extension, or a group of phones might be configured such that members of the group can pick up a call ringing at any group member phone. To pick up a call ringing at an extension in your group: STEP 1 Press GPickUp. The phone displays any extensions in the group that have ringing calls. STEP 2 Choose the call you want to pick up and press Dial.
3 Using Basic Phone Functions Using the Phone Directories Using the Phone Directories The Cisco SPA525G and SPA525G2 IP phones provide several different types of phone directories, depending on the phone model and what the system administrator has set up for the company. In general, the phones provide the following types of directories: • Personal Address Book—The personal directory provides a place for you to store and view frequently dialed numbers. You can also dial numbers from the directory.
Using Basic Phone Functions Using the Phone Directories 3 STEP 1 In the Personal Address Book screen, press Add. STEP 2 Use the keypad to enter the name of the directory entry. When finished with the name, use the Down Arrow to navigate to the other fields. TIP To enter numbers and letters, press Option and select Input All. To enter only numbers, press Option and select Input Num. To clear all characters from an entry, press Option and select Clear.
Using Basic Phone Functions Using the Phone Directories 3 You can press Dial to call the contact, or Option to delete, copy, or edit the contact. Deleting a Contact To delete a contact: STEP 1 In the Personal Address Book screen, highlight the contact you want to delete. STEP 2 Press Option and select Delete. STEP 3 Press OK to delete the contact. Editing a Contact To edit a contact’s phone information: STEP 1 In the Personal Address Book screen, highlight the contact you want to edit.
3 Using Basic Phone Functions Using the Call History Lists Using the Call History Lists Viewing the Call History Lists To view the Call History lists: STEP 1 Press Setup. STEP 2 Scroll to Call History and press Select. STEP 3 Select the Call History list you want to view. Available Call History lists are: • All Calls—Shows all calls placed, received, or missed. • Missed Calls—Shows the last 60 missed calls. • Received Calls—Shows the caller ID of the last 60 answered calls.
Using Basic Phone Functions Accessing Voicemail 3 NOTE If the call was from a long distance number, you may have to edit the call before dialing it. Press EditDial and use the softkeys and keypad to edit the number. Deleting an Entry from the Call History Lists STEP 1 In the call history list, choose the call. STEP 2 Press Option and select Delete Entry. STEP 3 Press OK. Saving a Call History List Number to Your Directory STEP 1 In the call history list, choose the call.
4 Using Advanced Phone Functions This chapter describes how to configure advanced features on your Cisco SPA525G and SPA525G2 IP phone.
Using Advanced Phone Functions Using Your Bluetooth-Enabled Mobile Phone 4 Not all mobile phones support this function. See the list of Bluetooth-enabled mobile phones supported with the Cisco SPA525G2 that is posted at the Cisco support community at http://www.cisco.com/go/smallbizsupport. Also consult the latest Cisco SPA525G2 release notes available at cisco.com.
Using Advanced Phone Functions Using Your Bluetooth-Enabled Mobile Phone 4 Initiating Pairing from the Cisco SPA525G2 The Cisco SPA525G2 connects to one Bluetooth device at a time. If multiple Bluetooth devices are in range of the Cisco SPA525G2, the order of devices in the Bluetooth Configuration > Bluetooth Profiles list is used, and the device with a higher priority is activated first.
Using Advanced Phone Functions Using Your Bluetooth-Enabled Mobile Phone 4 Initiating Pairing from Your Bluetooth-Enabled Mobile Phone The procedure varies depending on your phone model. You must turn Bluetooth on, and it might be necessary to configure a separate setting to make your mobile phone discoverable by other devices. Before starting, it is helpful to find the MAC address of your Cisco SPA525G2 IP phone. Go to the Setup menu and select Status > Product Information. The MAC address is listed.
Using Advanced Phone Functions Using Your Bluetooth-Enabled Mobile Phone • 4 Green icon—Bluetooth is enabled and the Cisco SPA525G2 is connected to a mobile phone. To verify the mobile phone configuration: STEP 1 On the Cisco SPA525G2, press the Setup button. STEP 2 Scroll to User Preferences and press Select. STEP 3 Scroll to Bluetooth and press Select. STEP 4 Scroll to Bluetooth Profiles and press the Right Arrow key. The mobile phone appears in the list of Bluetooth devices.
Using Advanced Phone Functions Using Your Bluetooth-Enabled Mobile Phone 4 Making a Mobile Phone Call through the Cisco SPA525G2 When you make a mobile phone call by using your Cisco SPA525G2, your Cisco SPA525G2 acts as a handsfree device for your phone. The call is made through your mobile phone, but the audio is present on and the call control is done by using the Cisco SPA525G2. (See “Switching Audio from Your Cisco SPA525G2 to Your Mobile Phone” section on page 54.
Using Advanced Phone Functions Using Your Bluetooth-Enabled Mobile Phone 4 Receiving Mobile Phone Calls by using the Cisco SPA525G2 If your mobile phone is paired with the Cisco SPA525G2, an incoming call to your mobile phone is also shown on the Cisco SPA525G22. Do one of the following: • Press Answer to connect to the call. • Press the red flashing line button associated with your mobile phone. • Pick up the Cisco SPA525G2 handset. • Press Ignore to ignore the call.
Using Advanced Phone Functions Charging Your Mobile Phone Using Your Cisco SPA525G2 4 The display bubble shows the following information if it is supported by the mobile phone: • Battery indicator—Shows the battery life left on your mobile phone. • Signal strength—Shows the signal strength for your mobile phone. • Network—The phone network for your mobile phone.
Using Advanced Phone Functions Playing MP3 Files on Your Phone 4 Playing MP3 Files on Your Phone Your IP phone contains an audio player that can play .mp3 files. To play music on your IP phone, you must load the audio files onto a USB memory device (not provided with the phone). The phone reads the content of the files from the device, so the device must remain inserted while playing the files. Only MP3 music without Digital Media Rights protection can be played on the IP phone.
Using Advanced Phone Functions Playing MP3 Files on Your Phone 4 Playing Songs In the Playlist, scroll to the song you want to begin playing and press Play. You can control the play by using the following controls: • Stop—Stop the song. Pressing play restarts the song. • Previous—Move to the previous song in the playlist. • Next—Move to the next song in the playlist. • Back—Move back one screen to the playlist. Controlling the Audio Use the Volume button to turn the sound up or down.
Using Advanced Phone Functions Customizing Your IP Phone Screen 4 Customizing Your IP Phone Screen You can customize your IP phone screen. Changing the Screen Contrast To adjust the contrast of the IP phone screen: STEP 1 Press the Setup button. STEP 2 Scroll to User Preferences and press Select. STEP 3 Scroll to Screen Preferences and press Select. STEP 4 Scroll to Display Brightness. The default contrast is 15. Enter a number between 1 (lowest) and 15 (greatest) to change the contrast.
Using Advanced Phone Functions Customizing Your IP Phone Screen 4 Configuring the Phone Screen Saver You can enable your phone screen saver and specify its appearance and the amount of time for the phone to be idle before it begins. To configure your screen saver: STEP 1 Press the Setup button. STEP 2 Scroll to User Preferences and press Select. STEP 3 Scroll to Screen Preferences and press Select.
Using Advanced Phone Functions Restarting Your Phone 4 Changing the Phone Wallpaper To change the background picture on your phone: STEP 1 Press the Setup button. STEP 2 Scroll to User Preferences and press Select. STEP 3 Scroll to Screen Preferences and press Select. STEP 4 Scroll to Wallpaper. Press the arrow keys to select an image to use as the wallpaper. STEP 5 Use the navigation arrows to highlight an image. To preview how the image will look on your phone, highlight the image and press View.
Using Advanced Phone Functions Viewing Phone, Network, and Call Information 4 Viewing Phone, Network, and Call Information The Cisco SPA525G and SPA525G2 provide menus to view status and network information about your phone. Viewing Product Information To view product information about your phone: STEP 1 Press the Setup button. STEP 2 Scroll to Status and press Select. STEP 3 Select Product Information.
Using Advanced Phone Functions Viewing the Wireless Connection Status • IP Address • Subnet Mask • Default Router • Primary DNS • Secondary DNS • MAC (Hardware) Address 4 Viewing Peripheral Status To view information about phone peripherals, such as a USB memory stick or a Cisco Attendant Console: STEP 1 Press Setup. STEP 2 Scroll to Status and press Select. STEP 3 Scroll to Peripheral Status and press Select.
Using Advanced Phone Functions Advanced Menus for Technical Support Personnel 4 STEP 4 Scroll to Wireless Status and press Select. The status, SSID name, and signal strength are displayed. Press Detail for more information. Advanced Menus for Technical Support Personnel These Network Configuration menus are used to configure and troubleshoot your phone and the phone network.
A Where to Go From Here Cisco provides a wide range of resources to help you and your customer obtain the full benefits of the Cisco SPA525G or Cisco SPA525G2. Support Cisco Small Business Support www.cisco.com/go/smallbizsupport Community Cisco Small Business Support www.cisco.com/go/smallbizhelp and Resources Phone Support Contacts www.cisco.com/en/US/support/ tsd_cisco_small_business _support_center_contacts.html Cisco Small Business Firmware Downloads www.cisco.
A Where to Go From Here Regulatory Compliance and Safety Information for the Cisco SPA300 Series and Cisco SPA500 Series IP Phone www.cisco.com/en/US/docs/voice_ip_comm/ csbpipp/ip_phones/regulatory_compliance/ guide/rcsi_500_series.pdf Cisco Small Business Cisco Partner Central for www.cisco.com/web/partners/sell/smb Small Business (Partner Login Required) Cisco Small Business Home www.cisco.
Power Adapter Statement This product is intended to be supplied by a Listed Direct Plug-In Power Unit marked “Class 2" or Listed Adapter marked “L.P.S.” (or “Limited Power Source”) and rated from +5Vdc, 2A minimum. FCC and IC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
IMPORTANT NOTE FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules.
