IP Phone User Manual
Table Of Contents
- Getting Started
- Installing Your Phone
- Using Basic Phone Functions
- Placing or Answering a Call
- Adjusting Call Volume and Muting
- Putting a Call on Hold
- Resuming a Call
- Ending a Call
- Transferring Calls
- Managing Call Waiting
- Recording a Live Call
- Viewing and Returning Calls
- Forwarding Calls
- Setting Do Not Disturb
- Configuring Call Waiting
- Picking Up a Call
- Placing a Three-Way Conference Call
- Using the Phone Directories
- Using the Call History Lists
- Accessing Voicemail
- Using Advanced Phone Functions
- Using Your Bluetooth-Enabled Mobile Phone
- Enabling Bluetooth
- Pairing Your Cisco SPA525G2 with a Bluetooth-Enabled Mobile Phone
- Verifying that the Cisco SPA525G2 is Paired
- Importing Your Mobile Phone Address Book into the Cisco SPA525G2
- Making a Mobile Phone Call through the Cisco SPA525G2
- Receiving Mobile Phone Calls by using the Cisco SPA525G2
- Switching Audio from Your Cisco SPA525G2 to Your Mobile Phone
- Viewing Mobile Phone Battery and Signal Information on Your Cisco SPA525G2
- Charging Your Mobile Phone Using Your Cisco SPA525G2
- Playing MP3 Files on Your Phone
- Customizing Your IP Phone Screen
- Restarting Your Phone
- Viewing Phone, Network, and Call Information
- Viewing the Wireless Connection Status
- Advanced Menus for Technical Support Personnel
- Using Your Bluetooth-Enabled Mobile Phone
- Where to Go From Here
Using Advanced Phone Functions
Using Your Bluetooth-Enabled Mobile Phone
Cisco Small Business SPA525G and SPA525G2 SPCP IP Phones User Guide 50
4
Initiating Pairing from the Cisco SPA525G2
The Cisco SPA525G2 connects to one Bluetooth device at a time. If multiple
Bluetooth devices are in range of the Cisco SPA525G2, the order of devices in the
Bluetooth Configuration > Bluetooth Profiles list is used, and the device with a
higher priority is activated first.
To pair a Bluetooth device with the IP phone:
STEP 1 Enable Bluetooth on the IP phone as described in the “Enabling Bluetooth”
section on page 49.
STEP 2 Press the Setup button.
STEP 3 Scroll to User Preferences and press Select.
STEP 4 Scroll to Bluetooth Configuration and press Select.
STEP 5 Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the
following:
• Handsfree—Your Cisco SPA525G2 will operate as a handsfree device with
a Bluetooth-enabled mobile phone.
• Phone—Your Cisco SPA525G2 pairs with a Bluetooth headset only. Choose
this option if you do not use the IP phone with a Bluetooth–enabled mobile
phone.
• Both—Your Cisco SPA525G2 will operate with your Bluetooth-enabled
mobile phone or a Bluetooth headset.
STEP 6 Scroll to Bluetooth Profiles and press the Right Arrow key to enter the profile
screen.
STEP 7 Press Scan to scan for the Bluetooth device.
Depending on the network environment (for example, the number of Bluetooth
devices and noise level), your Bluetooth headset might not appear on the found
devices list. Ensure the headset is powered on and has Bluetooth activated, and
retry the scan.
STEP 8 In the Select a Bluetooth Device to Pair list, select the device that you want to pair
and press Connect.