User Guide
Table Of Contents
- Cisco Wireless ISR and HWIC Access Point Configuration Guide
- Contents
- Preface
- Overview
- Configuring Radio Settings
- Enabling the Radio Interface
- Roles in Radio Network
- Configuring Network or Fallback Role
- Universal Client Mode
- Configuring Universal Client Mode
- Configuring Radio Data Rates
- Configuring Radio Transmit Power
- Configuring Radio Channel Settings
- Enabling and Disabling World Mode
- Enabling and Disabling Short Radio Preambles
- Configuring Transmit and Receive Antennas
- Disabling and Enabling Access Point Extensions
- Configuring the Ethernet Encapsulation Transformation Method
- Enabling and Disabling Reliable Multicast to Workgroup Bridges
- Enabling and Disabling Public Secure Packet Forwarding
- Configuring Beacon Period and DTIM
- Configuring RTS Threshold and Retries
- Configuring Maximum Data Retries
- Configuring Fragmentation Threshold
- Enabling Short Slot Time for 802.11g Radios
- Performing a Carrier Busy Test
- Configuring Multiple SSIDs
- Configuring an Access Point as a Local Authenticator
- Understand Local Authentication
- Configure a Local Authenticator
- Guidelines for Local Authenticators
- Configuration Overview
- Configuring the Local Authenticator Access Point
- Configuring Other Access Points to Use the Local Authenticator
- Configuring EAP-FAST Settings
- Limiting the Local Authenticator to One Authentication Type
- Unblocking Locked Usernames
- Viewing Local Authenticator Statistics
- Using Debug Messages
- Configuring Encryption Types
- Configuring Authentication Types
- Configuring RADIUS Servers
- Configuring and Enabling RADIUS
- Understanding RADIUS
- RADIUS Operation
- Configuring RADIUS
- Default RADIUS Configuration
- Identifying the RADIUS Server Host
- Configuring RADIUS Login Authentication
- Defining AAA Server Groups
- Configuring RADIUS Authorization for User Privileged Access and Network Services
- Starting RADIUS Accounting
- Selecting the CSID Format
- Configuring Settings for All RADIUS Servers
- Configuring the Access Point to Use Vendor-Specific RADIUS Attributes
- Configuring the Access Point for Vendor-Proprietary RADIUS Server Communication
- Configuring WISPr RADIUS Attributes
- Displaying the RADIUS Configuration
- RADIUS Attributes Sent by the Access Point
- Configuring and Enabling RADIUS
- Configuring VLANs
- Configuring QoS
- Channel Settings
- Protocol Filters
- Supported MIBs
- Error and Event Messages
- Glossary
- Index
B-2
Cisco Wireless ISR and HWIC Access Point Configuration Guide
OL-6415-04
Appendix B Protocol Filters
Ta b l e B-1 Ethertype Protocols
Protocol Additional Identifier ISO Designator
ARP — 0x0806
RARP — 0x8035
IP — 0x0800
Berkeley Trailer Negotiation — 0x1000
LAN Test — 0x0708
X.25 Level3 X.25 0x0805
Banyan — 0x0BAD
CDP — 0x2000
DEC XNS XNS 0x6000
DEC MOP Dump/Load — 0x6001
DEC MOP MOP 0x6002
DEC LAT LAT 0x6004
Ethertalk — 0x809B
Appletalk ARP Appletalk
AARP
0x80F3
IPX 802.2 — 0x00E0
IPX 802.3 — 0x00FF
Novell IPX (old) — 0x8137
Novell IPX (new) IPX 0x8138
EAPOL (old) — 0x8180
EAPOL (new) — 0x888E
Telxon TXP TXP 0x8729
Aironet DDP DDP 0x872D
Enet Config Test — 0x9000
NetBUI — 0xF0F0