User Guide
Table Of Contents
- Cisco Wireless ISR and HWIC Access Point Configuration Guide
- Contents
- Preface
- Overview
- Configuring Radio Settings
- Enabling the Radio Interface
- Roles in Radio Network
- Configuring Network or Fallback Role
- Universal Client Mode
- Configuring Universal Client Mode
- Configuring Radio Data Rates
- Configuring Radio Transmit Power
- Configuring Radio Channel Settings
- Enabling and Disabling World Mode
- Enabling and Disabling Short Radio Preambles
- Configuring Transmit and Receive Antennas
- Disabling and Enabling Access Point Extensions
- Configuring the Ethernet Encapsulation Transformation Method
- Enabling and Disabling Reliable Multicast to Workgroup Bridges
- Enabling and Disabling Public Secure Packet Forwarding
- Configuring Beacon Period and DTIM
- Configuring RTS Threshold and Retries
- Configuring Maximum Data Retries
- Configuring Fragmentation Threshold
- Enabling Short Slot Time for 802.11g Radios
- Performing a Carrier Busy Test
- Configuring Multiple SSIDs
- Configuring an Access Point as a Local Authenticator
- Understand Local Authentication
- Configure a Local Authenticator
- Guidelines for Local Authenticators
- Configuration Overview
- Configuring the Local Authenticator Access Point
- Configuring Other Access Points to Use the Local Authenticator
- Configuring EAP-FAST Settings
- Limiting the Local Authenticator to One Authentication Type
- Unblocking Locked Usernames
- Viewing Local Authenticator Statistics
- Using Debug Messages
- Configuring Encryption Types
- Configuring Authentication Types
- Configuring RADIUS Servers
- Configuring and Enabling RADIUS
- Understanding RADIUS
- RADIUS Operation
- Configuring RADIUS
- Default RADIUS Configuration
- Identifying the RADIUS Server Host
- Configuring RADIUS Login Authentication
- Defining AAA Server Groups
- Configuring RADIUS Authorization for User Privileged Access and Network Services
- Starting RADIUS Accounting
- Selecting the CSID Format
- Configuring Settings for All RADIUS Servers
- Configuring the Access Point to Use Vendor-Specific RADIUS Attributes
- Configuring the Access Point for Vendor-Proprietary RADIUS Server Communication
- Configuring WISPr RADIUS Attributes
- Displaying the RADIUS Configuration
- RADIUS Attributes Sent by the Access Point
- Configuring and Enabling RADIUS
- Configuring VLANs
- Configuring QoS
- Channel Settings
- Protocol Filters
- Supported MIBs
- Error and Event Messages
- Glossary
- Index
B-5
Cisco Wireless ISR and HWIC Access Point Configuration Guide
OL-6415-04
Appendix B Protocol Filters
TSAP iso-tsap 102
CSO Name Server cso-ns
csnet-ns
105
Remote Telnet rtelnet 107
Postoffice v2 POP2
POP v2
109
Postoffice v3 POP3
POP v3
110
Sun RPC sunrpc 111
tap ident authentication auth 113
sftp — 115
uucp-path — 117
Network News Transfer
Protocol
Network News
readnews
nntp
119
USENET News Transfer
Protocol
Network News
readnews
nntp
119
Network Time Protocol ntp 123
NETBIOS Name Service netbios-ns 137
NETBIOS Datagram Service netbios-dgm 138
NETBIOS Session Service netbios-ssn 139
Interim Mail Access Protocol v2 Interim Mail
Access Protocol
IMAP2
143
Simple Network Management
Protocol
SNMP 161
SNMP Traps snmp-trap 162
ISO CMIP Management Over IP CMIP Management
Over IP
cmip-man
CMOT
163
ISO CMIP Agent Over IP cmip-agent 164
X Display Manager Control
Protocol
xdmcp 177
NeXTStep Window Server NeXTStep 178
Border Gateway Protocol BGP 179
Prospero — 191
Internet Relay Chap IRC 194
Ta b l e B - 3 I P P o r t P r o t o c o l s ( c o n t i n u e d )
Protocol Additional Identifier ISO Designator