User Guide
Table Of Contents
- Cisco Wireless ISR and HWIC Access Point Configuration Guide
- Contents
- Preface
- Overview
- Configuring Radio Settings
- Enabling the Radio Interface
- Roles in Radio Network
- Configuring Network or Fallback Role
- Universal Client Mode
- Configuring Universal Client Mode
- Configuring Radio Data Rates
- Configuring Radio Transmit Power
- Configuring Radio Channel Settings
- Enabling and Disabling World Mode
- Enabling and Disabling Short Radio Preambles
- Configuring Transmit and Receive Antennas
- Disabling and Enabling Access Point Extensions
- Configuring the Ethernet Encapsulation Transformation Method
- Enabling and Disabling Reliable Multicast to Workgroup Bridges
- Enabling and Disabling Public Secure Packet Forwarding
- Configuring Beacon Period and DTIM
- Configuring RTS Threshold and Retries
- Configuring Maximum Data Retries
- Configuring Fragmentation Threshold
- Enabling Short Slot Time for 802.11g Radios
- Performing a Carrier Busy Test
- Configuring Multiple SSIDs
- Configuring an Access Point as a Local Authenticator
- Understand Local Authentication
- Configure a Local Authenticator
- Guidelines for Local Authenticators
- Configuration Overview
- Configuring the Local Authenticator Access Point
- Configuring Other Access Points to Use the Local Authenticator
- Configuring EAP-FAST Settings
- Limiting the Local Authenticator to One Authentication Type
- Unblocking Locked Usernames
- Viewing Local Authenticator Statistics
- Using Debug Messages
- Configuring Encryption Types
- Configuring Authentication Types
- Configuring RADIUS Servers
- Configuring and Enabling RADIUS
- Understanding RADIUS
- RADIUS Operation
- Configuring RADIUS
- Default RADIUS Configuration
- Identifying the RADIUS Server Host
- Configuring RADIUS Login Authentication
- Defining AAA Server Groups
- Configuring RADIUS Authorization for User Privileged Access and Network Services
- Starting RADIUS Accounting
- Selecting the CSID Format
- Configuring Settings for All RADIUS Servers
- Configuring the Access Point to Use Vendor-Specific RADIUS Attributes
- Configuring the Access Point for Vendor-Proprietary RADIUS Server Communication
- Configuring WISPr RADIUS Attributes
- Displaying the RADIUS Configuration
- RADIUS Attributes Sent by the Access Point
- Configuring and Enabling RADIUS
- Configuring VLANs
- Configuring QoS
- Channel Settings
- Protocol Filters
- Supported MIBs
- Error and Event Messages
- Glossary
- Index
C-1
Cisco Wireless ISR and HWIC Access Point Configuration Guide
OL-6415-04
APPENDIX
C
Supported MIBs
This appendix lists the Simple Network Management Protocol (SNMP) Management Information Bases
(MIBs) that the access point supports for this software release. The Cisco IOS SNMP agent supports both
SNMPv1 and SNMPv2. This appendix contains these sections:
• MIB List, page C-1
• Using FTP to Access the MIB Files, page C-2
MIB List
• IEEE802dot11-MIB
• Q-BRIDGE-MIB
• P-BRIDGE-MIB
• CISCO-DOT11-IF-MIB
• CISCO-WLAN-VLAN-MIB
• CISCO-IETF-DOT11-QOS-MIB
• CISCO-IETF-DOT11-QOS-EXT-MIB
• CISCO-DOT11-ASSOCIATION-MIB
• CISCO-DOT11-QOS-MIB
• CISCO-DOT11-SSID-SECURITY-MIB
• CISCO-L2-DEV-MONITORING-MIB
• CISCO-IP-PROTOCOL-FILTER-MIB
• CISCO-SYSLOG-EVENT-EXT-MIB
• CISCO-TBRIDGE-DEV-IF-MIB
• BRIDGE-MIB
• CISCO-CDP-MIB
• CISCO-CONFIG-COPY-MIB
• CISCO-CONFIG-MAN-MIB
• CISCO-FLASH-MIB
• CISCO-IMAGE-MIB