User Guide
Table Of Contents
- Cisco Wireless ISR and HWIC Access Point Configuration Guide
- Contents
- Preface
- Overview
- Configuring Radio Settings
- Enabling the Radio Interface
- Roles in Radio Network
- Configuring Network or Fallback Role
- Universal Client Mode
- Configuring Universal Client Mode
- Configuring Radio Data Rates
- Configuring Radio Transmit Power
- Configuring Radio Channel Settings
- Enabling and Disabling World Mode
- Enabling and Disabling Short Radio Preambles
- Configuring Transmit and Receive Antennas
- Disabling and Enabling Access Point Extensions
- Configuring the Ethernet Encapsulation Transformation Method
- Enabling and Disabling Reliable Multicast to Workgroup Bridges
- Enabling and Disabling Public Secure Packet Forwarding
- Configuring Beacon Period and DTIM
- Configuring RTS Threshold and Retries
- Configuring Maximum Data Retries
- Configuring Fragmentation Threshold
- Enabling Short Slot Time for 802.11g Radios
- Performing a Carrier Busy Test
- Configuring Multiple SSIDs
- Configuring an Access Point as a Local Authenticator
- Understand Local Authentication
- Configure a Local Authenticator
- Guidelines for Local Authenticators
- Configuration Overview
- Configuring the Local Authenticator Access Point
- Configuring Other Access Points to Use the Local Authenticator
- Configuring EAP-FAST Settings
- Limiting the Local Authenticator to One Authentication Type
- Unblocking Locked Usernames
- Viewing Local Authenticator Statistics
- Using Debug Messages
- Configuring Encryption Types
- Configuring Authentication Types
- Configuring RADIUS Servers
- Configuring and Enabling RADIUS
- Understanding RADIUS
- RADIUS Operation
- Configuring RADIUS
- Default RADIUS Configuration
- Identifying the RADIUS Server Host
- Configuring RADIUS Login Authentication
- Defining AAA Server Groups
- Configuring RADIUS Authorization for User Privileged Access and Network Services
- Starting RADIUS Accounting
- Selecting the CSID Format
- Configuring Settings for All RADIUS Servers
- Configuring the Access Point to Use Vendor-Specific RADIUS Attributes
- Configuring the Access Point for Vendor-Proprietary RADIUS Server Communication
- Configuring WISPr RADIUS Attributes
- Displaying the RADIUS Configuration
- RADIUS Attributes Sent by the Access Point
- Configuring and Enabling RADIUS
- Configuring VLANs
- Configuring QoS
- Channel Settings
- Protocol Filters
- Supported MIBs
- Error and Event Messages
- Glossary
- Index
IN-1
Cisco Wireless ISR and HWIC Access Point Configuration Guide
OL-6415-04
INDEX
Numerics
802.11d 20
802.11e 2
802.11g 28
802.1H 23
802.1x authentication 2
A
access point security settings, matching client devices 16
accounting
with RADIUS 12
accounting command 3
Address Resolution Protocol (ARP) 24
AES-CCMP 2
Aironet extensions 14, 23
antenna
selection 22
antenna command 22
attributes, RADIUS
sent by the access point 18
vendor-proprietary 15
vendor-specific 14
authentication
RADIUS
key 5
login 7
SSID 2
authentication client command 3
authentication server
configuring access point as local server 2
described 4
EAP 4, 3
authentication types
Network-EAP 4
open 2
shared key 3
authenticator 1
authorization
with RADIUS 11
B
backoff 28
backup authenticator, local 1
bandwidth 14
beacon dtim-period command 27
beacon period command 27
bit-flip attack 23
blocking communication between clients 25
bridge-group command 25
broadcast-key command 14
broadcast key rotation 1, 2
BSSIDs 6
C
caching MAC authentications 14
Called-Station-ID
See CSID
carrier busy test 29
CCK modulation 13
Cisco IOS software, locating documentation 13
client communication, blocking 25
client power level, limiting 13