User Guide
Table Of Contents
- Cisco Wireless ISR and HWIC Access Point Configuration Guide
- Contents
- Preface
- Overview
- Configuring Radio Settings
- Enabling the Radio Interface
- Roles in Radio Network
- Configuring Network or Fallback Role
- Universal Client Mode
- Configuring Universal Client Mode
- Configuring Radio Data Rates
- Configuring Radio Transmit Power
- Configuring Radio Channel Settings
- Enabling and Disabling World Mode
- Enabling and Disabling Short Radio Preambles
- Configuring Transmit and Receive Antennas
- Disabling and Enabling Access Point Extensions
- Configuring the Ethernet Encapsulation Transformation Method
- Enabling and Disabling Reliable Multicast to Workgroup Bridges
- Enabling and Disabling Public Secure Packet Forwarding
- Configuring Beacon Period and DTIM
- Configuring RTS Threshold and Retries
- Configuring Maximum Data Retries
- Configuring Fragmentation Threshold
- Enabling Short Slot Time for 802.11g Radios
- Performing a Carrier Busy Test
- Configuring Multiple SSIDs
- Configuring an Access Point as a Local Authenticator
- Understand Local Authentication
- Configure a Local Authenticator
- Guidelines for Local Authenticators
- Configuration Overview
- Configuring the Local Authenticator Access Point
- Configuring Other Access Points to Use the Local Authenticator
- Configuring EAP-FAST Settings
- Limiting the Local Authenticator to One Authentication Type
- Unblocking Locked Usernames
- Viewing Local Authenticator Statistics
- Using Debug Messages
- Configuring Encryption Types
- Configuring Authentication Types
- Configuring RADIUS Servers
- Configuring and Enabling RADIUS
- Understanding RADIUS
- RADIUS Operation
- Configuring RADIUS
- Default RADIUS Configuration
- Identifying the RADIUS Server Host
- Configuring RADIUS Login Authentication
- Defining AAA Server Groups
- Configuring RADIUS Authorization for User Privileged Access and Network Services
- Starting RADIUS Accounting
- Selecting the CSID Format
- Configuring Settings for All RADIUS Servers
- Configuring the Access Point to Use Vendor-Specific RADIUS Attributes
- Configuring the Access Point for Vendor-Proprietary RADIUS Server Communication
- Configuring WISPr RADIUS Attributes
- Displaying the RADIUS Configuration
- RADIUS Attributes Sent by the Access Point
- Configuring and Enabling RADIUS
- Configuring VLANs
- Configuring QoS
- Channel Settings
- Protocol Filters
- Supported MIBs
- Error and Event Messages
- Glossary
- Index
Index
IN-2
Cisco Wireless ISR and HWIC Access Point Configuration Guide
OL-6415-04
commands
accounting 3
antenna 22
authentication client 3
beacon dtim-period 27
beacon period 27
bridge-group 25
broadcast-key 14
countermeasure tkip hold-time 16
dot11 aaa mac-authen filter-cache 14
dot11 extension aironet 23
dot11 holdoff-time 15
dot11 interface-number carrier busy 29
dot1x client-timeout 15
dot1x reauth-period 15
encapsulation dot1q 6
encryption 4
fragment-threshold 28
guest-mode 4
infrastructure-client 25
infrastructure-ssid 4
interface dot11radio 1, 2
packet retries 27
payload-encapsulation 24
power client 14
rts retries 27
rts threshold 27
show dot11 associations 5
slot-time-short 28
speed 11
ssid 3, 9, 5
switchport protected 26
vlan 4, 5
world-mode 21
wpa-psk 13
commands station role 3
Complementary Code Keying (CCK)
See CCK
countermeasure tkip hold-time command 16
CSID format, selecting 13
D
Data Beacon Rate 26
data rate setting 10
data retries 27
default configuration
RADIUS 4
delivery traffic indication message (DTIM) 26
DFS 19
diversity 22
documentation
Cisco 1800 series routers 13
Cisco 800 series routers 13
Cisco High-Speed WAN Interface Card 12
Cisco IOS software 13
dot11 aaa mac-authen filter-cache command 14
dot11 extension aironet command 23
dot11 holdoff-time commands 15
dot11 interface-number carrier busy command 29
dot1x client-timeout command 15
dot1x reauth-period command 15
DTIM 26
Dynamic Frequency Selection 19
E
EAP authentication, overview 4
EAP-FAST 1, 2
EAP-FAST authentication 16
EAP-MD5 authentication
setting on client and access point 18
EAP-SIM authentication
setting on client and access point 18
EAP-TLS authentication
setting on client and access point 17
encapsulation dot1q command 6
encapsulation method 24