User Guide
Table Of Contents
- Cisco Wireless ISR and HWIC Access Point Configuration Guide
- Contents
- Preface
- Overview
- Configuring Radio Settings
- Enabling the Radio Interface
- Roles in Radio Network
- Configuring Network or Fallback Role
- Universal Client Mode
- Configuring Universal Client Mode
- Configuring Radio Data Rates
- Configuring Radio Transmit Power
- Configuring Radio Channel Settings
- Enabling and Disabling World Mode
- Enabling and Disabling Short Radio Preambles
- Configuring Transmit and Receive Antennas
- Disabling and Enabling Access Point Extensions
- Configuring the Ethernet Encapsulation Transformation Method
- Enabling and Disabling Reliable Multicast to Workgroup Bridges
- Enabling and Disabling Public Secure Packet Forwarding
- Configuring Beacon Period and DTIM
- Configuring RTS Threshold and Retries
- Configuring Maximum Data Retries
- Configuring Fragmentation Threshold
- Enabling Short Slot Time for 802.11g Radios
- Performing a Carrier Busy Test
- Configuring Multiple SSIDs
- Configuring an Access Point as a Local Authenticator
- Understand Local Authentication
- Configure a Local Authenticator
- Guidelines for Local Authenticators
- Configuration Overview
- Configuring the Local Authenticator Access Point
- Configuring Other Access Points to Use the Local Authenticator
- Configuring EAP-FAST Settings
- Limiting the Local Authenticator to One Authentication Type
- Unblocking Locked Usernames
- Viewing Local Authenticator Statistics
- Using Debug Messages
- Configuring Encryption Types
- Configuring Authentication Types
- Configuring RADIUS Servers
- Configuring and Enabling RADIUS
- Understanding RADIUS
- RADIUS Operation
- Configuring RADIUS
- Default RADIUS Configuration
- Identifying the RADIUS Server Host
- Configuring RADIUS Login Authentication
- Defining AAA Server Groups
- Configuring RADIUS Authorization for User Privileged Access and Network Services
- Starting RADIUS Accounting
- Selecting the CSID Format
- Configuring Settings for All RADIUS Servers
- Configuring the Access Point to Use Vendor-Specific RADIUS Attributes
- Configuring the Access Point for Vendor-Proprietary RADIUS Server Communication
- Configuring WISPr RADIUS Attributes
- Displaying the RADIUS Configuration
- RADIUS Attributes Sent by the Access Point
- Configuring and Enabling RADIUS
- Configuring VLANs
- Configuring QoS
- Channel Settings
- Protocol Filters
- Supported MIBs
- Error and Event Messages
- Glossary
- Index
Index
IN-4
Cisco Wireless ISR and HWIC Access Point Configuration Guide
OL-6415-04
N
names, VLAN 7
Network-EAP 4
O
OFDM 13
Orthogonal Frequency Division Multiplexing (OFDM)
See OFDM
P
packet retries command 27
packet size (fragment) 28
payload-encapsulation command 24
PEAP authentication
setting on client and access point 18
ports, protected 26
power client command 14
power level
on client devices 13
radio 23
power-save client device 26
preferential treatment of traffic
See QoS
pre-shared key 13
prioritization 2
protected ports 26
Public Secure Packet Forwarding (PSPF) 25
Q
QBSS 3
dot11e parameter 3
QoS
configuration guidelines 5
described 4
overview 2
quality of service
See QoS
R
radio
activity 29
congestion 14
interface 2
preamble 21
RADIUS
attributes
CSID format, selecting 13
sent by the access point 18
vendor-proprietary 15
vendor-specific 14
WISPr 16
configuring
access point as local server 2
accounting 12
authentication 7
authorization 11
communication, global 5, 13
communication, per-server 5
multiple UDP ports 5
default configuration 4
defining AAA server groups 9
displaying the configuration 17
identifying the server 5
limiting the services to the user 11
local authentication 2
method list, defined 4
operation of 3
overview 2
SSID 2
suggested network environments 2
tracking services accessed by user 12
RADIUS accounting 4
reauthentication requests 2