User Guide
Table Of Contents
- Cisco Wireless ISR and HWIC Access Point Configuration Guide
- Contents
- Preface
- Overview
- Configuring Radio Settings
- Enabling the Radio Interface
- Roles in Radio Network
- Configuring Network or Fallback Role
- Universal Client Mode
- Configuring Universal Client Mode
- Configuring Radio Data Rates
- Configuring Radio Transmit Power
- Configuring Radio Channel Settings
- Enabling and Disabling World Mode
- Enabling and Disabling Short Radio Preambles
- Configuring Transmit and Receive Antennas
- Disabling and Enabling Access Point Extensions
- Configuring the Ethernet Encapsulation Transformation Method
- Enabling and Disabling Reliable Multicast to Workgroup Bridges
- Enabling and Disabling Public Secure Packet Forwarding
- Configuring Beacon Period and DTIM
- Configuring RTS Threshold and Retries
- Configuring Maximum Data Retries
- Configuring Fragmentation Threshold
- Enabling Short Slot Time for 802.11g Radios
- Performing a Carrier Busy Test
- Configuring Multiple SSIDs
- Configuring an Access Point as a Local Authenticator
- Understand Local Authentication
- Configure a Local Authenticator
- Guidelines for Local Authenticators
- Configuration Overview
- Configuring the Local Authenticator Access Point
- Configuring Other Access Points to Use the Local Authenticator
- Configuring EAP-FAST Settings
- Limiting the Local Authenticator to One Authentication Type
- Unblocking Locked Usernames
- Viewing Local Authenticator Statistics
- Using Debug Messages
- Configuring Encryption Types
- Configuring Authentication Types
- Configuring RADIUS Servers
- Configuring and Enabling RADIUS
- Understanding RADIUS
- RADIUS Operation
- Configuring RADIUS
- Default RADIUS Configuration
- Identifying the RADIUS Server Host
- Configuring RADIUS Login Authentication
- Defining AAA Server Groups
- Configuring RADIUS Authorization for User Privileged Access and Network Services
- Starting RADIUS Accounting
- Selecting the CSID Format
- Configuring Settings for All RADIUS Servers
- Configuring the Access Point to Use Vendor-Specific RADIUS Attributes
- Configuring the Access Point for Vendor-Proprietary RADIUS Server Communication
- Configuring WISPr RADIUS Attributes
- Displaying the RADIUS Configuration
- RADIUS Attributes Sent by the Access Point
- Configuring and Enabling RADIUS
- Configuring VLANs
- Configuring QoS
- Channel Settings
- Protocol Filters
- Supported MIBs
- Error and Event Messages
- Glossary
- Index
Index
IN-5
Cisco Wireless ISR and HWIC Access Point Configuration Guide
OL-6415-04
regulatory
domains 15, 16, 18, 2
regulatory domains 1
Remote Authentication Dial-In User Service
See RADIUS
request to send (RTS) 27
restricting access
RADIUS 1
RFC
1042 23
roaming 2, 5
role (mode) 3
role in radio network 2
rotation, broadcast key 1
rts retries command 27
RTS threshold 27
rts threshold command 27
S
security features 4
synchronizing 16
service set identifiers (SSIDs)
See SSID
service-type attribute 2
shared key 6
short slot time 28
show dot11 associations command 5
slot-time-short command 28
SNMP, FTP MIB files 2
snooping helper, IGMP 6
spaces in an SSID 5
speed command 11
SSID 2
guest mode 2
multiple SSIDs 1
support 3
using spaces in 5
VLAN 2
ssid command 3, 9, 5
static WEP
with open authentication, setting on client and access
point
16
with shared key authentication, setting on client and
access point 16
station role command 3
switchport protected command 26
T
Tables
related documents 12
Temporal Key Integrity Protocol (TKIP) 1
See TKIP
TKIP 4, 1, 2
V
VLAN
local authentication 2
names 7
SSID 4, 2
vlan command 4, 5
W
WEP
key example 5
key hashing 4
with EAP 4
Wi-Fi Multimedia 4
Wi-Fi Protected Access
See WPA
Wi-Fi Protected Access (WPA) 4
WISPr RADIUS attributes 16
WMM 4
workgroup bridge 24
world mode 3, 20, 23