User Guide
Table Of Contents
- Cisco Wireless ISR and HWIC Access Point Configuration Guide
- Contents
- Preface
- Overview
- Configuring Radio Settings
- Enabling the Radio Interface
- Roles in Radio Network
- Configuring Network or Fallback Role
- Universal Client Mode
- Configuring Universal Client Mode
- Configuring Radio Data Rates
- Configuring Radio Transmit Power
- Configuring Radio Channel Settings
- Enabling and Disabling World Mode
- Enabling and Disabling Short Radio Preambles
- Configuring Transmit and Receive Antennas
- Disabling and Enabling Access Point Extensions
- Configuring the Ethernet Encapsulation Transformation Method
- Enabling and Disabling Reliable Multicast to Workgroup Bridges
- Enabling and Disabling Public Secure Packet Forwarding
- Configuring Beacon Period and DTIM
- Configuring RTS Threshold and Retries
- Configuring Maximum Data Retries
- Configuring Fragmentation Threshold
- Enabling Short Slot Time for 802.11g Radios
- Performing a Carrier Busy Test
- Configuring Multiple SSIDs
- Configuring an Access Point as a Local Authenticator
- Understand Local Authentication
- Configure a Local Authenticator
- Guidelines for Local Authenticators
- Configuration Overview
- Configuring the Local Authenticator Access Point
- Configuring Other Access Points to Use the Local Authenticator
- Configuring EAP-FAST Settings
- Limiting the Local Authenticator to One Authentication Type
- Unblocking Locked Usernames
- Viewing Local Authenticator Statistics
- Using Debug Messages
- Configuring Encryption Types
- Configuring Authentication Types
- Configuring RADIUS Servers
- Configuring and Enabling RADIUS
- Understanding RADIUS
- RADIUS Operation
- Configuring RADIUS
- Default RADIUS Configuration
- Identifying the RADIUS Server Host
- Configuring RADIUS Login Authentication
- Defining AAA Server Groups
- Configuring RADIUS Authorization for User Privileged Access and Network Services
- Starting RADIUS Accounting
- Selecting the CSID Format
- Configuring Settings for All RADIUS Servers
- Configuring the Access Point to Use Vendor-Specific RADIUS Attributes
- Configuring the Access Point for Vendor-Proprietary RADIUS Server Communication
- Configuring WISPr RADIUS Attributes
- Displaying the RADIUS Configuration
- RADIUS Attributes Sent by the Access Point
- Configuring and Enabling RADIUS
- Configuring VLANs
- Configuring QoS
- Channel Settings
- Protocol Filters
- Supported MIBs
- Error and Event Messages
- Glossary
- Index
CHAPTER
2-1
Cisco Wireless ISR and HWIC Access Point Configuration Guide
OL-6415-04
2
Configuring Radio Settings
This chapter describes how to configure radio settings for the wireless device. This chapter includes
these sections:
• Enabling the Radio Interface, page 2-2
• Roles in Radio Network, page 2-2
• Configuring Network or Fallback Role, page 2-3
• Sample Bridging Configuration, page 2-4
• Universal Client Mode, page 2-7
• Configuring Universal Client Mode, page 2-7
• Configuring Radio Data Rates, page 2-10
• Configuring Radio Transmit Power, page 2-12
• Configuring Radio Channel Settings, page 2-14
• Enabling and Disabling World Mode, page 2-20
• Enabling and Disabling Short Radio Preambles, page 2-21
• Configuring Transmit and Receive Antennas, page 2-22
• Disabling and Enabling Access Point Extensions, page 2-23
• Configuring the Ethernet Encapsulation Transformation Method, page 2-23
• Enabling and Disabling Reliable Multicast to Workgroup Bridges, page 2-24
• Enabling and Disabling Public Secure Packet Forwarding, page 2-25
• Configuring Beacon Period and DTIM, page 2-26
• Configuring RTS Threshold and Retries, page 2-27
• Configuring Maximum Data Retries, page 2-27
• Configuring Fragmentation Threshold, page 2-28
• Enabling Short Slot Time for 802.11g Radios, page 2-28
• Performing a Carrier Busy Test, page 2-29