User Guide
Table Of Contents
- Cisco Wireless ISR and HWIC Access Point Configuration Guide
- Contents
- Preface
- Overview
- Configuring Radio Settings
- Enabling the Radio Interface
- Roles in Radio Network
- Configuring Network or Fallback Role
- Universal Client Mode
- Configuring Universal Client Mode
- Configuring Radio Data Rates
- Configuring Radio Transmit Power
- Configuring Radio Channel Settings
- Enabling and Disabling World Mode
- Enabling and Disabling Short Radio Preambles
- Configuring Transmit and Receive Antennas
- Disabling and Enabling Access Point Extensions
- Configuring the Ethernet Encapsulation Transformation Method
- Enabling and Disabling Reliable Multicast to Workgroup Bridges
- Enabling and Disabling Public Secure Packet Forwarding
- Configuring Beacon Period and DTIM
- Configuring RTS Threshold and Retries
- Configuring Maximum Data Retries
- Configuring Fragmentation Threshold
- Enabling Short Slot Time for 802.11g Radios
- Performing a Carrier Busy Test
- Configuring Multiple SSIDs
- Configuring an Access Point as a Local Authenticator
- Understand Local Authentication
- Configure a Local Authenticator
- Guidelines for Local Authenticators
- Configuration Overview
- Configuring the Local Authenticator Access Point
- Configuring Other Access Points to Use the Local Authenticator
- Configuring EAP-FAST Settings
- Limiting the Local Authenticator to One Authentication Type
- Unblocking Locked Usernames
- Viewing Local Authenticator Statistics
- Using Debug Messages
- Configuring Encryption Types
- Configuring Authentication Types
- Configuring RADIUS Servers
- Configuring and Enabling RADIUS
- Understanding RADIUS
- RADIUS Operation
- Configuring RADIUS
- Default RADIUS Configuration
- Identifying the RADIUS Server Host
- Configuring RADIUS Login Authentication
- Defining AAA Server Groups
- Configuring RADIUS Authorization for User Privileged Access and Network Services
- Starting RADIUS Accounting
- Selecting the CSID Format
- Configuring Settings for All RADIUS Servers
- Configuring the Access Point to Use Vendor-Specific RADIUS Attributes
- Configuring the Access Point for Vendor-Proprietary RADIUS Server Communication
- Configuring WISPr RADIUS Attributes
- Displaying the RADIUS Configuration
- RADIUS Attributes Sent by the Access Point
- Configuring and Enabling RADIUS
- Configuring VLANs
- Configuring QoS
- Channel Settings
- Protocol Filters
- Supported MIBs
- Error and Event Messages
- Glossary
- Index
Contents
4
Cisco Wireless Router and HWIC Configuration Guide
OL-6415-04
Configuring Universal Client Mode 7
Configuring Radio Data Rates 10
Configuring Radio Transmit Power 12
Limiting the Power Level for Associated Client Devices 13
Configuring Radio Channel Settings 14
DFS Automatically Enabled on Some 5-GHz Radio Channels 19
Enabling and Disabling World Mode 20
Enabling and Disabling Short Radio Preambles 21
Configuring Transmit and Receive Antennas 22
Disabling and Enabling Access Point Extensions 23
Configuring the Ethernet Encapsulation Transformation Method 23
Enabling and Disabling Reliable Multicast to Workgroup Bridges 24
Enabling and Disabling Public Secure Packet Forwarding 25
Configuring Protected Ports 26
Configuring Beacon Period and DTIM 26
Configuring RTS Threshold and Retries 27
Configuring Maximum Data Retries 27
Configuring Fragmentation Threshold 28
Enabling Short Slot Time for 802.11g Radios 28
Performing a Carrier Busy Test 29
CHAPTER
3 Configuring Multiple SSIDs 1
Understanding Multiple SSIDs 2
SSID Configuration Methods Supported by Cisco IOS Releases 2
Configuring Multiple SSIDs 3
Creating an SSID Globally 3
Using a RADIUS Server to Restrict SSIDs 5
Configuring Multiple Basic SSIDs 6
Requirements for Configuring Multiple BSSIDs 6
Guidelines for Using Multiple BSSIDs 6
Enabling MBSSID and SSIDL at the same time 7
Sample Configuration for Enabling MBSSID and SSIDL 8
CHAPTER
4 Configuring an Access Point as a Local Authenticator 1
Understand Local Authentication 2
Configure a Local Authenticator 2
Guidelines for Local Authenticators 3