User Guide
Table Of Contents
- Cisco Wireless ISR and HWIC Access Point Configuration Guide
- Contents
- Preface
- Overview
- Configuring Radio Settings
- Enabling the Radio Interface
- Roles in Radio Network
- Configuring Network or Fallback Role
- Universal Client Mode
- Configuring Universal Client Mode
- Configuring Radio Data Rates
- Configuring Radio Transmit Power
- Configuring Radio Channel Settings
- Enabling and Disabling World Mode
- Enabling and Disabling Short Radio Preambles
- Configuring Transmit and Receive Antennas
- Disabling and Enabling Access Point Extensions
- Configuring the Ethernet Encapsulation Transformation Method
- Enabling and Disabling Reliable Multicast to Workgroup Bridges
- Enabling and Disabling Public Secure Packet Forwarding
- Configuring Beacon Period and DTIM
- Configuring RTS Threshold and Retries
- Configuring Maximum Data Retries
- Configuring Fragmentation Threshold
- Enabling Short Slot Time for 802.11g Radios
- Performing a Carrier Busy Test
- Configuring Multiple SSIDs
- Configuring an Access Point as a Local Authenticator
- Understand Local Authentication
- Configure a Local Authenticator
- Guidelines for Local Authenticators
- Configuration Overview
- Configuring the Local Authenticator Access Point
- Configuring Other Access Points to Use the Local Authenticator
- Configuring EAP-FAST Settings
- Limiting the Local Authenticator to One Authentication Type
- Unblocking Locked Usernames
- Viewing Local Authenticator Statistics
- Using Debug Messages
- Configuring Encryption Types
- Configuring Authentication Types
- Configuring RADIUS Servers
- Configuring and Enabling RADIUS
- Understanding RADIUS
- RADIUS Operation
- Configuring RADIUS
- Default RADIUS Configuration
- Identifying the RADIUS Server Host
- Configuring RADIUS Login Authentication
- Defining AAA Server Groups
- Configuring RADIUS Authorization for User Privileged Access and Network Services
- Starting RADIUS Accounting
- Selecting the CSID Format
- Configuring Settings for All RADIUS Servers
- Configuring the Access Point to Use Vendor-Specific RADIUS Attributes
- Configuring the Access Point for Vendor-Proprietary RADIUS Server Communication
- Configuring WISPr RADIUS Attributes
- Displaying the RADIUS Configuration
- RADIUS Attributes Sent by the Access Point
- Configuring and Enabling RADIUS
- Configuring VLANs
- Configuring QoS
- Channel Settings
- Protocol Filters
- Supported MIBs
- Error and Event Messages
- Glossary
- Index
Contents
5
Cisco Wireless Router and HWIC Configuration Guide
OL-6415-04
Configuration Overview 3
Configuring the Local Authenticator Access Point 3
Configuring Other Access Points to Use the Local Authenticator 8
Configuring EAP-FAST Settings 9
Limiting the Local Authenticator to One Authentication Type 11
Unblocking Locked Usernames 11
Viewing Local Authenticator Statistics 11
Using Debug Messages 12
12
CHAPTER
5 Configuring Encryption Types 1
Understand Encryption Types 2
Configure Encryption Types 3
Creating WEP Keys 3
Creating Cipher Suites 5
Enabling and Disabling Broadcast Key Rotation 7
Security Type in Universal Client Mode 8
CHAPTER
6 Configuring Authentication Types 1
Understand Authentication Types 2
Open Authentication to Access Point 2
Shared Key Authentication to Access Point 3
EAP Authentication to Network 4
MAC Address Authentication to the Network 5
Combining MAC-Based, EAP, and Open Authentication 6
Using WPA Key Management 6
Software and Firmware Requirements for WPA and WPA-TKIP 8
Configure Authentication Types 9
Assigning Authentication Types to an SSID 9
Configuring Authentication Holdoffs, Timeouts, and Intervals 15
Matching Access Point and Client Device Authentication Types 16
CHAPTER
7 Configuring RADIUS Servers 1
Configuring and Enabling RADIUS 2
Understanding RADIUS 2
RADIUS Operation 3
Configuring RADIUS 4
Displaying the RADIUS Configuration 17