Draft - Not Final Version Regulatory Compliance and Safety Information for Cisco 800 Series Routers This document provides international regulatory and safety compliance information for Cisco 800 series routers. Use this document with the other publications for the Cisco 800 series router you have purchased.
Draft - Not Final Version Product Scope Table 1 Cisco Product Models Addressed in this Document Models Product Classification EMC Class Wireless Standard Option of Outdoor Antenna 1. C812G+7-K9 B None No 2. C819G-4G-A-K9 B None Yes 3. C819G-4G-G-K9 B None Yes 4. C819G-4G-V-K9 B None Yes 5. C819G+7-K9 M2M B None No 6. C819G-B-K9 M2M B None No 7. C812G-CIFI+7-E-K9 B 2.4 GHz, 5 GHz No 8. C812G-CIFI+7-N-K9 B 2.4 GHz, 5 GHz No 9. C812G-CIFI-S-A-K9 B 2.
Draft - Not Final Version Product Scope Table 1 Cisco Product Models Addressed in this Document Models Product Classification EMC Class Wireless Standard Option of Outdoor Antenna 28. C819HWD-A-K9 B 2.4 GHz, 5 GHz Yes 29. C819HWD-E-K9 B 2.4 GHz, 5 GHz Yes 30. C866VAE-W-E-K9 Multimode DSL B 2.4 GHz, 5 GHz No 31. C867VAE-POE-W-A-K9 Multimode DSL B 2.4 GHz, 5 GHz No 32. C867VAE-W-A-K9 Multimode DSL B 2.4 GHz, 5 GHz No 33. C867VAE-W-E-K9 Multimode DSL B 2.
Draft - Not Final Version Product Scope Table 1 Cisco Product Models Addressed in this Document Models Product Classification EMC Class Wireless Standard Option of Outdoor Antenna 54. C887VA-W-A-K9 Multimode DSL A 2.4 GHz No 55. C887VA-W-E-K9 Multimode DSL A 2.4 GHz No 56. C887VA-WD-A-K9 Multimode DSL A 2.4 GHz, 5 GHz No 57. C887VA-WD-E-K9 Multimode DSL A 2.4 GHz, 5 GHz No 58. C887VAG+7-K9 Multimode DSL A None No 59. C887VAG-S-K9 Multimode DSL A None No 60.
Draft - Not Final Version Product Scope Table 1 Cisco Product Models Addressed in this Document Models Product Classification EMC Class Wireless Standard Option of Outdoor Antenna 80. CISCO861W-GN-A-K9 Ethernet B 2.4 GHz No 81. CISCO861W-GN-E-K9 Ethernet B 2.4 GHz No 82. CISCO861W-GN-P-K9 Ethernet B 2.4 GHz No 83. CISCO866VAE Multimode DSL B None No 84. CISCO866VAE-K9 Multimode DSL B None No 85. CISCO867VAE Multimode DSL B None No 86.
Draft - Not Final Version Product Scope Table 1 Cisco Product Models Addressed in this Document Models Product Classification EMC Class Wireless Standard Option of Outdoor Antenna 106. CISCO887VA-M-K9 Multimode DSL A None No 107. CISCO887VA-SEC-K9 Multimode DSL A None No 108. CISCO887VG-K9 Multimode DSL A None No 109. CISCO887VGW-GNA-K9 VDSL A 2.4 GHz No 110. CISCO887VGW-GNE-K9 VDSL A 2.4 GHz No 111. CISCO887VW-GNA-K9 Multimode DSL A 2.4 GHz No 112.
Draft - Not Final Version Electromagnetic Compatibility Table 1 Cisco Product Models Addressed in this Document Product Classification EMC Class Models Wireless Standard Option of Outdoor Antenna 134. CISCO892FW-A-K9 Ethernet B 2.4 GHz, 5 GHz No 135. CISCO892FW-E-K9 Ethernet B 2.4 GHz, 5 GHz No 136. CISCO892J-K9 Ethernet A None No 137. CISCO892W-AGN-E-K9 Ethernet B 2.4 GHz, 5 GHz No 138. CISCO892W-AGN-P-K9 Ethernet B 2.
Draft - Not Final Version Electromagnetic Compatibility CISPR 22 Class A Statement This equipment complies with the requirements of CISPR 22 (EN 55022) for Class A Information Technology Equipment (ITE). Warning This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Statement 2021—Class A Notice for Canada This Class A digital apparatus complies with Canadian ICES-003.
Draft - Not Final Version Electromagnetic Compatibility installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
Draft - Not Final Version Telecommunications Australia Compliance Statement Network connected equipment is approved to the Australian and New Zealand Safety and EMC requirements by Cisco Systems Incorporated which is a Recognized Laboratory by ACA and New Zealand. Stand-alone power supply modules provided with this equipment are separately approved by an Australian State designated Electricity Authority.
Draft - Not Final Version Telecommunications company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAAANNAAAAAAA. The digits represented by 01 are the REN without a decimal point. If this Router (Cisco 860VAE) causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required.
Draft - Not Final Version Radio Cisco 801, 802, 803, 804, 805, 806, 811, 813, 815, 826, 827, 828, 831, 836, 837, 851, 856, 857, 858, 871, 877, 878, 881-V, and 887VA-V routers, and Cisco SOHO 76, 77, 78, 91, 96, and 97 routers bearing labeling identification number US:5BMFMAM0013 or US:5B1DLO1B0144, and IAD881F, IAD881B, C881SRST, 888, 888G, IAD888F, IAD888B, C888SRST, routers bearing labeling identification number US:5B1IS01B0247, and Cisco 891, 892 routers bearing labeling identification number US:5B1IS01
Draft - Not Final Version Radio Radio: Statements and Additional Information Note This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation. For more details, contact Cisco Corporate Compliance. Cautions Relevant to 5 GHz Radio Statement 372—Wireless LAN Products All wireless LAN products in the 5.2/5.3GHz band cannot be used outdoors. Use the product only indoors.
Draft - Not Final Version Radio Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du Canada. This device complies with Class B Limits of Industry Canada. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. Cisco 2.
Draft - Not Final Version Radio Italiano [Italian]: Questo apparato é conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE. Latviski [Latvian]: [Lithuanian]: Nederlands [Dutch]: Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EC. Malti [Maltese]: Magyar [Hungarian]: Norsk [Norwegian]: Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-direktiv 1999/5/EF.
Draft - Not Final Version Radio point must be installed to maintain a minimum 20 cm (7.9 in.) co-located separation distance from other FCC approved indoor/outdoor antennas used with the access point. Any antennas or transmitters not approved by the FCC cannot be co-located with the access point. The access point’s co-located 2.4 GHz integrated antennas support a minimum separation distance of 8 cm (3.2 in.) and are compliant with the applicable FCC RF exposure limit when transmitting simultaneously.
Draft - Not Final Version Radio Statement 392—Device is Prohibited for Outdoor Operations Within the 5.25–5.35 GHz Band To avoid radio interference, this device is prohibited for outdoor operations within the 5.25–5.35 GHz band. (for unit covers 5.25–5.
Draft - Not Final Version Declarations of Conformity Declarations of Conformity The Declaration of Conformity statements for this product can be found at the following URL: http://www.ciscofax.com Note If you still have questions regarding the compliance of these products or you cannot find the information you are looking for, please send an e-mail request to complianceinfo@cisco.com. CE Marking This product bears the CE mark in conformance with Annex VII of Directive 1999/5/CE.
Draft - Not Final Version European Union Statements European Union Statements The following statements apply in the European Union (EU). • Network Termination Point Statement • ISDN S/T Ports Statement Network Termination Point Statement This product does not contain a “Network Termination Point” (NTP) as defined by ETSI 300 386-2. This product is classified by the manufacturer as “Terminal Equipment.” If you have any additional questions, please contact your local network operator.
Draft - Not Final Version Translated Safety Warnings • Statement 94—Wrist Strap Warning • Statement 119—Unit Short Circuit Protection • Statement 150—Power Off Before Working on System • Statement 151—ISDN Network Voltages Warning • Statement 162—EU Public Network Port Warning • Statement 199—Emergency Access Warning • Statement 242—Equipment Grounding Warning • Statement 332—Antenna Installation Warning • Statement 353—This Product Must be Connected • Statement 371—Power Cable and AC Ad
Draft - Not Final Version Translated Safety Warnings • Statement 1072—Shock Hazard from Interconnections • Statement 1073—No User-Serviceable Parts • Statement 1074—Comply with Local and National Electrical Codes • Statement 1077—Do Not Operate Unit Without Covers • Statement 1088—Avoid Servicing Outdoor Connections During an Electrical Storm Statement 1071—Warning Definition Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger.
Draft - Not Final Version Translated Safety Warnings Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut.
Draft - Not Final Version Translated Safety Warnings Varning! VIKTIGA SÄKERHETSANVISNINGAR Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.
Draft - Not Final Version Translated Safety Warnings Aviso INSTRUÇÕES IMPORTANTES DE SEGURANÇA Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes.
Draft - Not Final Version Translated Safety Warnings Regulatory Compliance and Safety Information for Cisco 800 Series Routers OL-10260-06 25
Draft - Not Final Version Translated Safety Warnings Statement 19—TN Power Warning Warning Waarschuwing Varoitus The device is designed to work with TN power systems. Het apparaat is ontworpen om te functioneren met TN energiesystemen. Koje on suunniteltu toimimaan TN-sähkövoimajärjestelmien yhteydessä. Attention Ce dispositif a été conçu pour fonctionner avec des systèmes d'alimentation TN. Warnung Das Gerät ist für die Verwendung mit TN-Stromsystemen ausgelegt.
Draft - Not Final Version Translated Safety Warnings Aviso ¡Advertencia! Varning! O dispositivo foi criado para operar com sistemas de corrente TN. El equipo está diseñado para trabajar con sistemas de alimentación tipo TN. Enheten är konstruerad för användning tillsammans med elkraftssystem av TN-typ. Statement 23—ISDN Connection Warning Warning The ISDN connection is regarded as a source of voltage that should be inaccessible to user contact.
Draft - Not Final Version Translated Safety Warnings Attention La connexion du réseau numérique intégré (Integrated Services Digital Network ou ISDN) constitue une source de tension qui ne doit pas être accessible à l'utilisateur. Les utilisateurs ne doivent jamais tenter de modifier ni même d'ouvrir un matériel fourni par une compagnie de téléphone public, ou le matériel de connexion.
Draft - Not Final Version Translated Safety Warnings Statement 43—Jewelry Removal Warning Warning Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals. Waarschuwing Alvorens aan apparatuur te werken die met elektrische leidingen is verbonden, sieraden (inclusief ringen, kettingen en horloges) verwijderen.
Draft - Not Final Version Translated Safety Warnings Advarsel Fjern alle smykker (inkludert ringer, halskjeder og klokker) før du skal arbeide på utstyr som er koblet til kraftledninger. Metallgjenstander som er koblet til kraftledninger og jord blir svært varme og kan forårsake alvorlige brannskader eller smelte fast til polene. Aviso Antes de trabalhar em equipamento que esteja ligado a linhas de corrente, retire todas as jóias que estiver a usar (incluindo anéis, fios e relógios).
Draft - Not Final Version Translated Safety Warnings Statement 94—Wrist Strap Warning Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself. Waarschuwing Draag tijdens deze procedure aardingspolsbanden om te vermijden dat de kaart beschadigd wordt door elektrostatische ontlading.
Draft - Not Final Version Translated Safety Warnings Advarsel Bruk jordingsarmbånd under prosedyren for å unngå ESD-skader på kortet. Unngå direkte berøring av bakplanet med hånden eller metallverktøy, slik at di ikke får elektrisk støt. Aviso Durante este procedimento e para evitar danos ESD causados à placa, use fitas de ligação à terra para os pulsos. Para evitar o risco de choque eléctrico, não toque directamente na parte posterior com a mão ou com qualquer ferramenta metálica.
Draft - Not Final Version Translated Safety Warnings Varoitus Tämä tuote on riippuvainen rakennuksen oikosulkusuojauksesta (ylivirtasuojauksesta). Varmista, että vaihejohtimissa (kaikissa jännitteellisissä johtimissa) käytetään alle 240 V vaihtovirran, 16–20 ampeerin (kansainvälinen) tai 120 V vaihtovirran, 20 ampeerin (Yhdysvallat) sulaketta tai virtakytkintä. Sulakkeessa tai virtakytkimessä on oltava käyttömaassa tunnistetut, riittävät turvahyväksynnät.
Draft - Not Final Version Translated Safety Warnings Statement 150—Power Off Before Working on System Warning Waarschuwing Varoitus Before working on a system that has a standby/off switch, turn off the power by pressing the power switch to standby and unplug the power cord. Alvorens aan een systeem met een standby/uit-schakelaar te werken dient u de voeding uit te schakelen door de voedingsschakelaar op standby te zetten en het voedingssnoer te verwijderen.
Draft - Not Final Version Translated Safety Warnings Statement 151—ISDN Network Voltages Warning Warning Network hazardous voltages are present in the ISDN cable. If you detach the ISDN cable, detach the end away from the router first to avoid possible electric shock. Network hazardous voltages also are present on the system card in the area of the ISDN port (RJ-45 connector), regardless of when power is turned off (by pressing power switch to standby).
Draft - Not Final Version Translated Safety Warnings ¡Advertencia! Las líneas RSDI contienen voltajes peligrosos de la red. Si desconecta el cable RSDI, separe primero el final del router para evitar posibles choques eléctricos. La tarjeta del sistema en el área del puerto RSDI (conector RJ-45) también contiene altos voltajes de la red, independientemente de si está apagada (posicionando el interruptor de la corriente a standby). Varning! I ISDN-kabeln förekommer spänningar som är farliga för nätverk.
Draft - Not Final Version Translated Safety Warnings ¡Advertencia! Si aparece el símbolo de idoneidad con una cruz sobrepuesta encima de un puerto, no debe conectar el puerto a una red pública que siga los estándares de la Unión Europea. Si conecta el puerto a este tipo de red pública puede lesionarse o dañar su router. Varning! Om lämplighetssymbolen med ett överlagt kors visas ovanför en port, får porten inte anslutas till ett offentligt nätverk av EU-standard.
Draft - Not Final Version Translated Safety Warnings ¡Advertencia! Este equipo no está diseñado para efectuar llamadas telefónicas de emergencia en caso de que falle la alimentación. Se deberán tomar medidas alternativas para acceder a servicios de emergencia. El acceso a servicios de emergencia puede verse afectado por cualquier función de bloqueo de llamadas que pueda tener este equipo. Varning! Denna utrustning är inte utformad för telefonsamtal i nödläge när strömmen bryts.
Draft - Not Final Version Translated Safety Warnings Statement 332—Antenna Installation Warning This warning applies only to Cisco 850 series and Cisco 870 series routers. Warning In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a minimum of 7.9 inches (20 cm) or more from the body of all persons.
Draft - Not Final Version Translated Safety Warnings Statement 353—This Product Must be Connected Warning Waarschuwing Varoitus This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source or an IEC60950 compliant limited power source. Dit product moet worden verbonden met een stroomvoorziening die compatibel is met PoE (power-over-ethernet) IEEE 802.3af of een beperkte stroomvoorziening die compatibel is met IEC60950.
Draft - Not Final Version Translated Safety Warnings Statement 371—Power Cable and AC Adapter Warning When installing the product, please use the provided or designated connection cables/power cables/AC adaptors/batteries. Using any other cables/adaptors could cause a malfunction or a fire.
Draft - Not Final Version Translated Safety Warnings Varning! Den här utrustningen får endast anslutas till en inomhusantenn. Statement 378—Read Wall-Mounting Instructions Before Installation Warning Read the wall-mounting instructions carefully before beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
Draft - Not Final Version Translated Safety Warnings Aviso Leia com cuidado as instruções de montagem na parede antes de iniciar a instalação. Falha em usar o hardware correto ou em seguir os procedimentos corretos pode resultar numa situação de risco para as pessoas e danos ao sistema. ¡Advertencia! Lea atentamente las instrucciones que se encuentran en la pared antes de comenzar con la instalación.
Draft - Not Final Version Translated Safety Warnings Warnung Benutzen Sie Ihr drahtloses Netzwerkgerät nicht in der Nähe ungeschützter Sprengkapseln oder anderer explosiver Stoffe, es sei denn, Ihr Gerät wurde eigens für diesen Gebrauch modifiziert und bestimmt. Avvertenza Non utilizzare la periferica di rete senza fili in prossimità di un detonatore non protetto o di esplosivi a meno che la periferica non sia stata modificata a tale proposito.
Draft - Not Final Version Translated Safety Warnings Statement 1005—Circuit Breaker Warning Waarschuwing Varoitus This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 120 VAC, 15A U.S. (240 VAC, 10A international) Dit product is afhankelijk van de installatie van het gebouw voor beveiliging tegen kortsluiting (overstroom). Controleer of de beschermingsinrichting niet meer dan: 120 VAC, 15A U.S.
Draft - Not Final Version Translated Safety Warnings Attention Pour ce qui est de la protection contre les courts-circuits (surtension), ce produit dépend de l'installation électrique du local. Vérifiez que le courant nominal du dispositif de protection n'est pas supérieur à : 120 VAC, 15A U.S. (240 VAC, 10A international) Warnung Dieses Produkt ist darauf angewiesen, dass im Gebäude ein Kurzschluss- bzw. Überstromschutz installiert ist.
Draft - Not Final Version Translated Safety Warnings Statement 1008—Class 1 Laser Product Warning Waarschuwing Varoitus Class 1 laser product. Klasse-1 laser produkt. Luokan 1 lasertuote. Attention Produit laser de classe 1. Warnung Laserprodukt der Klasse 1. Avvertenza Prodotto laser di Classe 1. Advarsel Laserprodukt av klasse 1. Aviso Produto laser de classe 1. ¡Advertencia! Varning! Aviso Advarsel Producto láser Clase I. Laserprodukt av klass 1. Produto a laser de classe 1.
Draft - Not Final Version Translated Safety Warnings Statement 1010—Staring into Laser Beam Warning Waarschuwing Varoitus Do not stare into the laser beam. Niet in de straal staren. Älä katso säteeseen. Attention Ne pas fixer le faisceau des yeux. Warnung Nicht direkt in den Strahl blicken. Avvertenza Advarsel Aviso ¡Advertencia! Varning! Non fissare il raggio con gli occhi. Stirr ikke på strålen. Não olhe fixamente para o raio. No mirar fijamente el haz. Laserstrålning när enheten är öppen.
Draft - Not Final Version Translated Safety Warnings Statement 1015—Battery Handling Warning Waarschuwing There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Er is ontploffingsgevaar als de batterij verkeerd vervangen wordt.
Draft - Not Final Version Translated Safety Warnings Statement 1016—Invisible Laser Radiation Warning Waarschuwing Varoitus Invisible laser radiation present. Onzichtbare laserstraling aanwezig. Näkymättömiä lasersäteitä. Attention Rayonnement laser actif mais invisible. Warnung Unsichtbare Laserstrahlung. Avvertenza Advarsel Aviso ¡Advertencia! Varning! Radiazione laser invisibile. Usynlig laserstråling. Radiação laser invisível presente. Existe radiación láser invisible.
Draft - Not Final Version Translated Safety Warnings Statement 1021—SELV Circuit Warning Waarschuwing Varoitus To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables.
Draft - Not Final Version Translated Safety Warnings Aviso Para evitar choques eléctricos, não conecte os circuitos de segurança de baixa tensão (SELV) aos circuitos de tensão de rede telefónica (TNV). As portas LAN contêm circuitos SELV e as portas WAN contêm circuitos TNV. Algumas portas LAN e WAN usam conectores RJ-45. Tenha o devido cuidado ao conectar os cabos.
Draft - Not Final Version Translated Safety Warnings Statement 1023—No. 26 AWG Warning Waarschuwing Varoitus To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Om brandgevaar te reduceren, dient slechts telecommunicatielijnsnoer nr. 26 AWG of groter gebruikt te worden. Tulipalovaaran vähentämiseksi käytä ainoastaan nro 26 AWG- tai paksumpaa tietoliikennejohdinta.
Draft - Not Final Version Translated Safety Warnings Statement 1024—Ground Conductor Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. Waarschuwing Deze apparatuur dient geaard te zijn.
Draft - Not Final Version Translated Safety Warnings Regulatory Compliance and Safety Information for Cisco 800 Series Routers OL-10260-06 55
Draft - Not Final Version Translated Safety Warnings Statement 1025—Use Copper Conductors Only Warning Waarschuwing Varoitus Use copper conductors only. Gebruik alleen koperen geleiders. Käytä vain kuparijohtimia. Attention Utilisez uniquement des conducteurs en cuivre. Warnung Verwenden Sie ausschließlich Kupferleiter. Avvertenza Advarsel Aviso ¡Advertencia! Varning! Usate unicamente dei conduttori di rame. Bruk bare kobberledninger. Utilize apenas fios condutores de cobre.
Draft - Not Final Version Translated Safety Warnings Statement 1026—WAN Port Static Shock Warning Hazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF or ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables, detach the end away from the unit first. Waarschuwing Er is gevaarlijke netwerkspanning aanwezig in WAN poorten ongeacht of de stroom naar de router INGESCHAKELD of UITGESCHAKELD is.
Draft - Not Final Version Translated Safety Warnings Varning! Farlig nätverksspänning föreligger i WAN-portarna oavsett om strömförsörjningen till enheten är bruten eller ej. För att undvika elektriska stötar ska du vara försiktig vid arbete i närheten av dessa portar. När du kopplar bort en kabel ska du först koppla bort den ände som inte är ansluten till enheten. Statement 1028—More Than One Power Supply Warning This unit might have more than one power supply connection.
