User Manual Part 1
20
Regulatory Compliance and Safety Information for Cisco 800 Series Routers
OL-10260-06
Translated Safety Warnings
•
Statement 94—Wrist Strap Warning
•
Statement 119—Unit Short Circuit Protection
•
Statement 150—Power Off Before Working on System
•
Statement 151—ISDN Network Voltages Warning
•
Statement 162—EU Public Network Port Warning
•
Statement 199—Emergency Access Warning
•
Statement 242—Equipment Grounding Warning
•
Statement 332—Antenna Installation Warning
•
Statement 353—This Product Must be Connected
•
Statement 371—Power Cable and AC Adapter
•
Statement 373—Must Connect To An Indoor Antenna
•
Statement 378—Read Wall-Mounting Instructions Before Installation
•
Statement 393—Explosive Device Proximity Wireless Network Device
•
Statement 1004—Installation Instructions
•
Statement 1005—Circuit Breaker
•
Statement 1008—Class 1 Laser Product
•
Statement 1010—Staring into Laser Beam
•
Statement 1015—Battery Handling
•
Statement 1016—Invisible Laser Radiation
•
Statement 1021—SELV Circuit
•
Statement 1023—No. 26 AWG
•
Statement 1024—Ground Conductor
•
Statement 1025—Use Copper Conductors Only
•
Statement 1026—WAN Port Static Shock
•
Statement 1028—More Than One Power Supply
•
Statement 1030—Equipment Installation
•
Statement 1031—EU Public Network Port
•
Statement 1033—SELV-IEC 60950 DC Power Supply
•
Statement 1035—Proximity to Water
•
Statement 1036—Telephone Jacks in Wet Locations
•
Statement 1037—Uninsulated Wires or Terminals
•
Statement 1038—Telephone Use During an Electrical Storm
•
Statement 1040—Product Disposal
•
Statement 1042—Ring Signal Generator
•
Statement 1046—Installing or Replacing the Unit
•
Statement 1052—Installing and Grounding the Antenna
•
Statement 1056—Unterminated Fiber Cable
•
Statement 1057—Hazardous Radiation Exposure
Draft - Not Final Version