User Manual Part 1

7
Regulatory Compliance and Safety Information for Cisco 800 Series Routers
OL-10260-06
Electromagnetic Compatibility
Electromagnetic Compatibility
This section describes electromagnetic compatibility (EMC) compliance conditions. It contains the
following:
• EMC Class A
• EMC Class B
EMC Class A
This section includes the following EMC Class A warnings:
• Statement 2017—Class A Notice for FCC
• CISPR 22 Class A Statement
• Statement 2021—Class A Notice for Canada
• Statement 191—VCCI Class A Warning for Japan
Statement 2017—Class A Notice for FCC
Modifying the equipment without Cisco's authorization may result in the equipment no longer
complying with FCC requirements for Class A or Class B digital devices. In that event, your right to use
the equipment may be limited by FCC regulations, and you may be required to correct any interference
to radio or television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to
P
art 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
134. CISCO892FW-A-K9 Ethernet B 2.4 GHz,
5 GHz
No
135. CISCO892FW-E-K9 Ethernet B 2.4 GHz,
5 GHz
No
136. CISCO892J-K9 Ethernet A None No
137. CISCO892W-AGN-E-K9 Ethernet B 2.4 GHz,
5 GHz
No
138. CISCO892W-AGN-P-K9 Ethernet B 2.4 GHz,
5 GHz
No
Table 1 Cisco Product Models Addressed in this Document
Models
Product
Classification EMC Class
Wireless
Standard
Option of
Outdoor Antenna
Draft - Not Final Version