User manual

78-6643-01 09/27/99 Cisco 6100 Series System Cables 3

Cisco 6100 Series User Guide 3-17

3.4 DOH Conﬁguration Cables

In a DOH conﬁguration, use only designated cables to connect the MC, LCC, PSC, and MDF. This

section provides tables and illustrations for the following:

• Basic component cables

• PSC to MDF cables

Note Some chassis connectors in the cabling diagrams are not used because they are speciﬁc to one

of the other conﬁgurations of the Cisco 6100 Series system or because they are reserved for

future use.

3.4.1 Basic DOH Component Cables

You can use one-to-one cables to connect the MC, LCC, and PSC for systems using dual-port CAP

ATU-C modules. Table 3-9 lists the backplane connectors and the part numbers for the basic

one-to-one cables connecting the MC, LCC, and PSC in a DOH conﬁguration.

Note When you use the one-to-one cable, see Table C-7 on page C-23 for port

mapping information.

Table 3-9 Connectors and Part Numbers for One-to-One Cables—MC, LCC, and PSC

Connections

Backplane Connector

Cisco Part Number

NetSpeed Part

NumberKit Subassembly

MC LCC

J45 J25 CAB-61-011 72-1627-01 4100-014-01

J46 J26 CAB-61-011 72-1626-01 4100-014-02

J47 J29 CAB-61-011 72-1641-01 4100-030-02

LCC LCC

J27 J25 CAB-61-012 72-1625-01 4100-014-03

J28 J26 CAB-61-012 72-1625-01 4100-014-03

J30 J29 CAB-61-012 72-1602-01 4100-030-01

LCC PSC

J23 J6 CAB-61-013 72-1619-01 4100-016-01

J22 J5 CAB-61-013 72-1619-01 4100-016-01

J24 J4 CAB-61-013 72-1619-01 4100-016-01

J21 J3 CAB-61-013 72-1619-01 4100-016-01