Install Manual

-HW&HOO,QF
9LS HU& HOO

+DUGZDUH

,QVW DOODW LRQ

³

%HWD

 
  9LSHU&HOO+DUGZDUH,QVWDOODWLRQ
A complete ViperNet Installation requires the installation of four major compo-
nents:
• The ViperCell combined GSM Radio and H.323 Endpoint hardware
• The ViperWatch Operations, Administration, and Maintenance (OA&M)
software
• The ViperBase GSM-Enhanced H.323 Gatekeeper software
• The V7M Interworking software
This Installation and Commissioning (I&C) Guide describes how to install the
ViperCell combined GSM Radio and H.323 Endpoint hardware. Installation of
ViperWatch, ViperBase, and V7M software are each described in their own Instal-
lation and Commissioning Guide.
Before beginning the procedures described in this document please consult the
ViperCell Pre-Installation Checklist to determine whether your site is ready to
receive ViperCell hardware.
,QVWDOOLQJ9LSHU&HOO+DUGZDUH
Installing ViperCell hardware involves the following major steps:
• Mount the ViperCell bracket to the wall
• Attach the ViperCell hardware to the bracket
• Connect the ViperCell hardware to a 10 or 100 BaseT LAN
• Connect the ViperCell hardware to power and verify the self-test sequence
• Attach the decorative faceplate
Completion of Hardware Installation is followed by installation of the ViperWatch
OA&M Software.
8QSDFNLQJ9LSHU&HOO
Each ViperCell is shipped with the following:
• A ViperCell combined GSM Radio and H.323 Endpoint assembly
• An AC/DC power transformer that accepts a 110-220 VAC input, and pro-
duces a 12 VDC 5A output
• A country-specific power cord
• A bracket for mounting the ViperCell to a wall
• A decorative faceplate
• A package of screws used to attach the bracket and faceplate
If you have ordered the GPS option, this list is supplemented by the following two
items: