Install Manual
Table Of Contents
-
9LSH U&H OO+D UGZDUH,QVWDOODWLRQ³%HWD
• A GPS antenna assembly
• A GPS connecting cable
Report missing or damage items to JetCell, Inc. (E-Mail or Telephone number?)
&KRRVLQJ: KHUHWR0RXQW9LSHU&HOO
Choosing where to install ViperCell is important:
• Avoid placing ViperCell in direct sunlight or in locations of extreme heat or
cold: ViperCell operates from -5C to +45C.
• Put the ViperCell in an area free of obstructions that could interfere with
the operation of the GSM radio components
• Place the ViperCell unit at least 10’ (3 M) from the floor
For additional help in choosing a location for your ViperCell combined GSM
Radio & H.323 Endpoint, consult the ViperCell Pre-Installation Checklist.
Once a location has been chosen, it is necessary to install the wall bracket.
0RXQWLQJWKH:DOO%UDFNHW
The ViperCell wall bracket is attached to the wall using the four mounting holes.
7RPRXQWWKHZDOOEUDFNHW
1 Hold the bracket up to the wall so that the key-hole shaped holes in the
bracket are positioned as shown.
2 Secure the bracket to the wall using all four wall-mounting holes.
Wall-mounting hole (4)
External earth
grounding point
Key-hole shaped
mounting hole (4)
Optional swivel-mount
attachments (4)
Power/LAN cable entry