User Manual

Navini Networks, Inc. Base Station User Manual
Overview
Ripwave Description
A Ripwave system has three main components: the Customer Premise Equipment (CPE); the
Base Station; and the Element Management System (EMS). The Base Station performs the CPE
registration and call processing, and provides the interface between the backhaul network and the
EMS. It is made up of the Base Transceiver Station (BTS) and the Radio Frequency Subsystem
(RFS) (Figure 1).
Figure 1: Base Station Installation With Panel Antenna
LIGHTNING
ROD
GPS
ETHERNET
/ TELCO
OVERHEAD
CABLE LADDER
SHELTER / HUT
SELF SUPPORTING
GUIDE
ANTENNA TOWER
PANEL
ANTENNA
ANTENNA
BRACK
ET
PSX-ME
SURGE
PROTECTOR
GROUND
BAR
RF CABLES
CABLE
HANGERS
CABLE
LADDER
CABLE
ENTRY
GROUND
BAR
OPTION 1
INDOOR BTS
PSX
GROUND BAR
24VDC
@ 60A
CABINET
GND
PSX
GROUND BAR
NAVINI
BTS
ETHERNET
TELCO
24VDC @ 60A
CABINET
GND
OPTION 2
OUTDOOR BTS
Note: The illustration shows both
an outdoor and an indoor BTS,
but only one panel antenna. In
reality, each BTS requires
its own panel.
LIGHTNING
ROD
GPS
ETHERNET
/ TELCO
OVERHEAD
CABLE LADDER
SHELTER / HUT
SELF SUPPORTING
GUIDE
ANTENNA TOWER
PANEL
ANTENNA
ANTENNA
BRACK
ET
PSX-ME
SURGE
PROTECTOR
GROUND
BAR
RF CABLES
CABLE
HANGERS
CABLE
LADDER
CABLE
ENTRY
GROUND
BAR
OPTION 1
INDOOR BTS
PSX
GROUND BAR
24VDC
@ 60A
CABINET
GND
PSX
GROUND BAR
NAVINI
BTS
ETHERNET
TELCO
24VDC @ 60A
CABINET
GND
OPTION 2
OUTDOOR BTS
LIGHTNING
ROD
GPS
ETHERNET
/ TELCO
OVERHEAD
CABLE LADDER
SHELTER / HUT
SELF SUPPORTING
GUIDE
ANTENNA TOWER
PANEL
ANTENNA
ANTENNA
BRACK
ET
PSX-ME
SURGE
PROTECTOR
GROUND
BAR
RF CABLES
CABLE
HANGERS
CABLE
LADDER
CABLE
ENTRY
GROUND
BAR
OPTION 1
INDOOR BTS
PSX
GROUND BAR
24VDC
@ 60A
CABINET
GND
PSX
GROUND BAR
NAVINI
BTS
ETHERNET
TELCO
24VDC @ 60A
CABINET
GND
OPTION 2
OUTDOOR BTS
Note: The illustration shows both
an outdoor and an indoor BTS,
but only one panel antenna. In
reality, each BTS requires
its own panel.
Part #40-00047-01 Rev C v1.0 (1.20) 17
September 26, 2003