User Manual

Navini Networks, Inc. Ripwave Modem User Guide
Part #40-00097-00 Rev E v1.0 Copyright © 2003 Navini Networks, Inc. All rights reserved. 13
July 30, 2003
Installing an Ethernet
Modem, continued
Step Action Illustration
4. Rotate the antenna on
the Ripwave Modem
clockwise 180 degrees
to the UP position. This
reveals the Ripwave
Modem indicator lights.
CAUTION! Rotation or
movement of the
antenna in any other
direction may cause
damage to the Ripwave
Modem.
5. Push the On/Off button
on the Modem to ON.
6. If the Green Power
indicator light comes on,
proceed to Step 7. If not,
there is a problem with
the Modem or the AC
power adapter. Check all
cables for proper
connection. Otherwise,
contact the supplier
from whom you
obtained the package.
Signal Strength
Indicator (SSI)
Power
Indicator
Battery
Indicator
Antenna
Signal Strength
Indicator (SSI)
Power
Indicator
Battery
Indicator
Antenna
On/Off
Switch
2.4 GHz
2.3, 2.5 &
2.6 GHz
On/Off
Switch
2.4 GHz
2.3, 2.5 &
2.6 GHz
Power
Indicator
Power
Indicator