user manual

5-24
Cisco ASA Series Firewall ASDM Configuration Guide
Chapter 5 Configuring Twice NAT (ASA 8.3 and Later)
Configuring Twice NAT
Step 10 Click OK.
Configuring Identity NAT
This section describes how to configure an identity NAT rule using twice NAT. For more information
about identity NAT, see the “Identity NAT” section on page 3-12.
Detailed Steps
To configure identity NAT, perform the following steps:
Step 1 Choose Configuration > Firewall > NAT Rules, and then click Add.
If you want to add this rule to section 3 after the network object rules, then click the down arrow next to
Add, and choose Add NAT Rule After Network Object NAT Rules.
The Add NAT Rule dialog box appears.