user manual

30-15
Cisco ASA Series Firewall ASDM Configuration Guide
Chapter 30 Configuring the ASA CX Module
Configuring the ASA CX Module
Step 3 Click Send.
Single Context Mode
Step 1 In ASDM, choose Wizards > Startup Wizard.
Step 2 Click Next to advance through the initial screens until you reach the ASA CX Basic Configuration
screen.
Step 3 Enter the new management IP address, subnet mask, and default gateway.
Step 4 (Optional) Change the Auth Proxy Port. You can set this later if desired. See the “(Optional) Configuring
the Authentication Proxy Port” section on page 30-18 for more information.
Command Purpose
session 1 do setup host ip
ip_address/mask,gateway_ip
Example:
ciscoasa# session 1 do setup host ip
10.1.1.2/24,10.1.1.1
Sets the ASA CX management IP address, mask, and gateway.