user manual

31-24
Cisco ASA Series Firewall ASDM Configuration Guide
Chapter 31 Configuring the ASA IPS Module
Monitoring the ASA IPS module
Reloading or Resetting the Module
To reload or reset the module, enter one of the following commands at the ASA CLI.
Detailed Steps
Monitoring the ASA IPS module
See the “Intrusion Prevention Tab” section on page 4-28 in the general operations configuration guide.
Command Purpose
For a hardware module (for example, the ASA
5585-X):
hw-module module 1 reload
For a software module (for example, the ASA
5545-X):
sw-module module ips reload
Example:
ciscoasa# hw-module module 1 reload
Reloads the module software.
For a hardware module:
hw-module module 1 reset
For a software module:
sw-module module ips reset
Example:
ciscoasa# hw-module module 1 reset
Performs a reset, and then reloads the module.